Click for Delta Click for Nordhavn Click for Cross Click for YF Listing Service Click for Burger

Value Differential; 65’ to 70’ Hatteras MY

Discussion in 'General Yachting Discussion' started by SkyDriver, Oct 1, 2025.

You need to be registered and signed in to view this content.
  1. SkyDriver, Oct 1, 2025
    #1
    SkyDriver

    SkyDriver Member

    Joined:
    Jul 16, 2016
    Messages:
    39
    Location:
    SRQ
    Looking for a estimated price difference for late 90's Hatteras motoryacht (65'-70')

    DDEC 12v92 vs Cat 3412 both with 2500-3000 hrs.

    (I realize a 12v92 rebuild coming up very soon)

    Also a complete paint job topsides & bottom cost. (75k -100k) ?

    Thanks
  2. bernd1972, Oct 7, 2025
    #2
    bernd1972

    bernd1972 Senior Member

    Joined:
    Mar 1, 2011
    Messages:
    310
    Location:
    Flensburg, Germany
    Not enough details to give a serious estimate. It all comes down to equipment, general maintenance situation, cosmetic condition,....
    Endless things to compare.

    Would be an interesting topic to discuss though. Value of both boats (which one has which engines? Will depend on a good number of aspects and is difficult to say without knowing both boats even with more details. Lots of expensive stuff to care for and see fail on both boats...
  3. Pascal, Oct 7, 2025
    #3
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,807
    Location:
    Miami, FL
    The 3412s especially if 3412Es are great engines. I ran a pair of Es in a 2003 70’ Johnson for about 8-9 years, they had 5500 hours when the boat sold and passed survey with flying colors. very little maintenance required over the 4000 hours I put on them beside the routine stuff

    I would say that, all other things being equal (very hypothetical) the 3412s should add at least $100k value over the DDs, maybe more

    bottom paint won’t affect value, it’s routine maintenance every couple of years. Figure $5k

    all Hatteras weee painted which will last much longer that gel coat. You d be surprised what a good detailer could do with 20-25 year old awlgrip or imron. I ve seen mid 80s Hatteras paint brought back from the dead…. If it is really damaged, I’d say a good $100k for a spray job.
  4. DOCKMASTER, Oct 7, 2025
    #4
    DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,627
    Location:
    Ketchikan, Alaska
    Hard to imagine the 12V92 boat would come anywhere close to the CAT powered boat. There is a high % of buyers that simply won't even consider the 12V92 boat. And the DDEC's are very hard to near impossible to get parts and service for (trust me, I know).

    I don't think you are going to get a quality, full topside paint job on a 65' boat for $75-$100k. I paid more than that for my 54' sportfish. Maybe on the east coast costs are much lower because you have a number of yards that can do it but that still seems low.
  5. SkyDriver, Oct 8, 2025
    #5
    SkyDriver

    SkyDriver Member

    Joined:
    Jul 16, 2016
    Messages:
    39
    Location:
    SRQ
    Thank you for your opinions.

    I could not find a pricing difference example for 3412's vs 12v92's (both being equal). And you're correct DDEC bothers me for lack of support going forward.

    Jim
  6. DOCKMASTER, Oct 8, 2025
    #6
    DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,627
    Location:
    Ketchikan, Alaska
    None of the DDEC components are made any longer and haven't been for some time. When (not if) a part is needed you either send it back to Sturdy and hope they can repair it or you have to find something off Ebay or similar places. And good luck finding someone that can trouble shoot a DDEC problem these days. This is one of the main reason I pulled the 12v92's out of my boat and repowered with CAT.