Click for Delta Click for Westport Click for Mag Bay Click for Cross Click for Mulder

Cabo 40 with CAT C12’s- Good or??

Discussion in 'Cabo Yacht' started by DOCKMASTER, Dec 20, 2021.

You need to be registered and signed in to view this content.
  1. DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,396
    Location:
    Ketchikan, Alaska
    I have a friend looking at a 2005 40’ Cabo convertible with 700hp CAT C12s. Only has like 1100 hrs on them. One aftercooler has been replaced, the other one is in a crate ready to be installed. I don’t know the story why only one was done. Yes, the easy side was the one that was done. Yes, full surveys will be done.

    What say those with knowledge of this boat and engines?
  2. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    They're good engines, the express did 30.5 knots at cruise, figure 28.5 knots for the flybridge. A little noisier and slower than the man 800's or cummins zues that were options then.
    boatpoor likes this.
  3. DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,396
    Location:
    Ketchikan, Alaska
    Thanks J. How about the boat? Any gremlins?
  4. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    No, Cabo's are great boats. The 40' is a very respected boat and many consider one of Cabo's best riding boats.
  5. CaboFly

    CaboFly Member

    Joined:
    Aug 24, 2018
    Messages:
    256
    Location:
    Seattle
    Great hull and boat. I would look over gelcoat carefully to see how much crazing it has. Crazing bothers some more than others.
  6. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,111
    Location:
    Sardinia
    You might have already seen these Cabo seatrials sheets, but just in case...

    Ref. the hours, if anything they sound unusually low, for a 16 years old boat.
    What does your friend know of the boat history (if anything)?

    Attached Files:

    • C40.pdf
      File size:
      27.6 KB
      Views:
      357
  7. BigChief

    BigChief Member

    Joined:
    Sep 3, 2018
    Messages:
    81
    Location:
    CT
    I have a pair of 2008 C12 With similar hours no major issues just a few annoying oil leaks and antifreeze leaks. The after cooler cores are the big issue Due to their cost and 6 year replacement Requirement because they are aluminum. If you have the other core that just needs to be replaced and your oil samples come back good your all set.
    I have twin disk transmissions with the hydraulic shifters, The straight straight 6 design of the C12 makes them a torque monster I usually have to switch it into the low idle mode when docking because it bites so hard it moves the boat instantly.

    You have to go through the local cat dealership to get parts but they usually have everything in stock
  8. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,111
    Location:
    Sardinia
    Are they, really? The CORES?!?
    I thought that only the external box was aluminum - which is an already debatable choice - but using it for the tube bundles is beyond a joke! o_O
  9. BigChief

    BigChief Member

    Joined:
    Sep 3, 2018
    Messages:
    81
    Location:
    CT
    Mapism that is correct the housing is aluminium and the core has a mixture. the corrosion is the issue in salt water maybe due to thin material. Mine tested good after 6 yrs but had visible metal flaking and thin spots. Mine were replaced.
    All the big Diesels have after cooler maintenance some better than others pick your poison if you will.
  10. DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,396
    Location:
    Ketchikan, Alaska
    Thanks all! I will pass on the info.
  11. mapism

    mapism Senior Member

    Joined:
    Aug 9, 2008
    Messages:
    2,111
    Location:
    Sardinia
    Well, I agree as a general principle, but one has to wonder what were they thinking at Cat, in this particular case.
    I happen to know intimately the MAN aftercoolers, and they are all made in bronze.
    They do use aluminum for the heat exchanger, but only for the external case. The tubes bundle inside is bronze also there.
    FWIW, they (I mean CACs+HEs, and on both engines) are by now 17 years old on my boat, and while I'm writing this with my fingers firmly crossed, I do hope they will still last for a very long time...
  12. BigChief

    BigChief Member

    Joined:
    Sep 3, 2018
    Messages:
    81
    Location:
    CT
    Not to get off topic, myself and a friend here on this forum did the salt water service on his 50 post with MANS I liked the simplicity of the German design and the solid bronze after cooler and HE bundle. They should last more than the life of the engines.
    As far as my C12s I knew the AC situation before I bought it and it's part of cost of ownership.
    Best off luck with your purchase keep us updated...
  13. Ben Cooksey

    Ben Cooksey Member

    Joined:
    Oct 10, 2020
    Messages:
    45
    Location:
    Mobile AL
    We sea trialed a 09’ 40FB with the C-12’s about year half ago in a nasty sea. Did real well 24kts in 3 foot stacked gulf chop, liked it alot but wanted a bit extra room so went with a 05’ 43FB that had been completely painted. That 09 didn’t have the crazing issues either.