Click for Mulder Click for Furuno Click for Delta Click for Abeking Click for Mulder

1984 catalina 280 transmission

Discussion in 'Chris Craft Connies, Commanders & Catalinas' started by joe marshall, Dec 6, 2021.

  1. joe marshall

    joe marshall New Member

    Joined:
    Aug 27, 2021
    Messages:
    11
    Location:
    Fl
    Anyone know what transmission is in the 84 Catalina 280?
  2. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,725
    Location:
    Satsuma, FL
    Paragon, Borg, Chris, others...
    Should be a tag on it.
    If not, send us a picture.
  3. joe marshall

    joe marshall New Member

    Joined:
    Aug 27, 2021
    Messages:
    11
    Location:
    Fl
    I believe it to be a zf i just dont know what one
  4. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,725
    Location:
    Satsuma, FL
    ZF? Maybe, but unless it was re-powered, it may be to old of a boat for a ZF.
    There are tags on ZF clutches also.
    What engine?
  5. cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,648
    Location:
    Cherry Hill, NJ
    Hurth or Borg Warner velvet drive
    What Captain Ralph said also.
    Highly doubt it’s a ZF.
  6. joe marshall

    joe marshall New Member

    Joined:
    Aug 27, 2021
    Messages:
    11
    Location:
    Fl
    It looks like the zf pics i have seen online and looking at the stringers it looks like there may have been something different at some time ill be at the boat sunday and ill take pics
  7. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,725
    Location:
    Satsuma, FL
    ZF took over Hurth a ways back.
    Some cases are the same, some were dropped. Lots of model numbers were changed on the surviving cases.
    Unless the boat was re-powered with a newer setup, from 1984 on a chevy V-8 was usually Borg or Paragon.
    Please send pictures of the gear, engine and all tags.
  8. joe marshall

    joe marshall New Member

    Joined:
    Aug 27, 2021
    Messages:
    11
    Location:
    Fl
  9. cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,648
    Location:
    Cherry Hill, NJ
    I knew that...I knew that..:rolleyes:. CR, you gave me another lesson.
  10. joe marshall

    joe marshall New Member

    Joined:
    Aug 27, 2021
    Messages:
    11
    Location:
    Fl
    So any idea what trans it is?
  11. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,725
    Location:
    Satsuma, FL
    FM, that is a ZF clutch.
    Series 25 thru 45A.
    Find the tag on the clutch and call a ZF Marine shop for the correct model number.

    Later Chevy small block.
    Vortec heads and intake manifold.
    Not original engine package.

    I remember looking at this sad package before. Thought (hoped) we talked the guy out of it.
  12. cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,648
    Location:
    Cherry Hill, NJ
    As we say in Philadelphia… “ My man….”
    CR.
    Done figured out deal.

    Op , good luck with your boat.
    I hope it works out for you.

    sea trail ….sea trail…make sure it works. In the water sea trail , btw .
  13. joe marshall

    joe marshall New Member

    Joined:
    Aug 27, 2021
    Messages:
    11
    Location:
    Fl
    Whats so sad about it
  14. joe marshall

    joe marshall New Member

    Joined:
    Aug 27, 2021
    Messages:
    11
    Location:
    Fl
    The boat ram great before it sank and it only sank do to dead batteries
  15. joe marshall

    joe marshall New Member

    Joined:
    Aug 27, 2021
    Messages:
    11
    Location:
    Fl
    ?