Click for Mulder Click for Burger Click for YF Listing Service Click for Furuno Click for Delta

Any Experience with Marco Fresh Water Pumps?

Discussion in 'General Yachting Discussion' started by Rick Vicik, Jun 13, 2021.

You need to be registered and signed in to view this content.
  1. Rick Vicik

    Rick Vicik New Member

    Joined:
    Oct 22, 2017
    Messages:
    4
    Location:
    Seattle, Washington, USA
    I'm thinking of replacing my Jabsco 52600-0092 fresh water pump with a flow-sensing Marco UP6/E. Marco quality seems much higher (reflected in the price) and flow-sensing makes more sense than a full-on/full-off pump with an accumulator tank to smooth things out. My concern is pressure. The Jabsco delivers between 43 and 60psi. Based on my experience with rinsing soap off in the shower, I don't want to go much lower. All Marco 12VDC pumps top out at ~37psi. That seems a little low. Comments?
    ---rick
  2. Graeme Walker

    Graeme Walker New Member

    Joined:
    Apr 6, 2018
    Messages:
    11
    Location:
    Ontario
    First time post, don't think I'm a 'Yacht' yet (47') but just replaced existing diaphragm fresh water pump (noisy) with Marco UP3/E, wished I'd used the UP6 to get more volume, unit is so much smaller and much much quieter. I did use an accumulator, Johnson 2l, figured it was worth adding that component to smooth things out. Also added a Seagull filter. Marco actually said it would work better with an accumulator but not required. Have had great support from Marco, used a UP3/OIL-R for changing oil from Engines/transmissions/generator, so far so good. Isn't it more about volume than pressure?