Click for Glendinning Click for JetForums Click for Delta Click for Westport Click for Walker

Steering PU2 pump overl/phase

Discussion in 'Electronics' started by derek chow, Mar 8, 2021.

You need to be registered and signed in to view this content.
  1. derek chow, Mar 8, 2021
    #1
    derek chow

    derek chow New Member

    Joined:
    Jan 4, 2021
    Messages:
    6
    Location:
    Hong Kong
    Hi all,
    I have a problem about the steering PU2 pump alarm. The alarm is about PU2 OVERL/PHASE. I checked the input , output phase and the fuse in the starter . it's normal. Now I reinstalled all fuse . The alarm reset OK. So what is the problem is? And what is the next step if the alarm appear again?
  2. NYCAP123, Mar 8, 2021
    #2
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,210
    Location:
    Long Island, NY
    Did you replace the fuse with new? If not and it happens after awhile I'd suspect the fuse. If it happens with a new fuse I'd suspect a short and look for an area where the lines rub or are pinched,
  3. derek chow, Mar 8, 2021
    #3
    derek chow

    derek chow New Member

    Joined:
    Jan 4, 2021
    Messages:
    6
    Location:
    Hong Kong
    still not replace. I will follow your advise. thx so much