Click for Cross Click for Burger Click for Perko Click for Mulder Click for Furuno

Golden Ray to be scrapped in place....

Discussion in 'General Yachting Discussion' started by Oscarvan, Oct 19, 2019.

You need to be registered and signed in to view this content.
  1. Oscarvan

    Oscarvan Senior Member

    Joined:
    Nov 10, 2015
    Messages:
    969
    Location:
    Chesapeake Bay
    Bet that's loud up close.....
  2. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,584
    Location:
    Vero Beach
    You'd have to think this detail is being added to the Pilot's check list upon boarding...
  3. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,584
    Location:
    Vero Beach
    When you really think about how the scene may have played out, felt, reacted...it sure would seem that the change in course was related more to physics as compared to human decision, and that the physical shift initiated the chain of events.......that then all summed up in a plausible explanation pointing to human decision making.

    The lack of proper ballasting would have left her prone to considerable instability to any outside forces, and then amplified by the turn. Oversteering a correction could even had amplified the roll.
  4. rtrafford

    rtrafford Senior Member

    Joined:
    Jul 13, 2019
    Messages:
    1,584
    Location:
    Vero Beach
    But a lot safer than Sparky holding a plasma cutter....
  5. C team

    C team Senior Member

    Joined:
    Nov 1, 2011
    Messages:
    244
    Location:
    Kent Island
    Very cool article Chesapeake 46!
  6. chesapeake46

    chesapeake46 Senior Member

    Joined:
    Jul 26, 2009
    Messages:
    1,781
    Location:
    Chesapeake Bay, Delaware Bay & S.Jersey
    Great pictures there ! Don't buy any used cars in Ga. if they seem too good to be true !!
  7. Oscarvan

    Oscarvan Senior Member

    Joined:
    Nov 10, 2015
    Messages:
    969
    Location:
    Chesapeake Bay
    I don't think ANY of those cars can be "saved" by Earl Scheib.....
  8. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,434
    Location:
    Fort Lauderdale
    It's amazing to see exactly how piled up and damaged they are. I can only imagine the forces on that ship when it tipped over.
  9. yr2030

    yr2030 Senior Member

    Joined:
    May 28, 2020
    Messages:
    119
    Location:
    Iceland
    Look like tinker toys
  10. LM Viking

    LM Viking Member

    Joined:
    Sep 20, 2018
    Messages:
    141
    Location:
    Michigan
    Still there when I was on St Simon Island on February 20th. Apparently they are having trouble with the cut that includes the engine room and have broken the chain more than once. They were disengaged from the wreck at that time for maintenance. BC009615-42A8-419D-9F37-EEEC6C5618D4.jpeg
  11. LM Viking

    LM Viking Member

    Joined:
    Sep 20, 2018
    Messages:
    141
    Location:
    Michigan
    5F176B49-93DA-404A-9CD1-C1DF19133494.jpeg
  12. Seasmaster

    Seasmaster Senior Member

    Joined:
    May 25, 2016
    Messages:
    277
    Location:
    USA
    Capt J, it isn't the engineer who's responsible for ballasting the vessel [usually], it is the chief mate or cargo mate. I know, because I sailed CM on these types of vessels for several years. However, if you look at the pictures of the cut sections, you'll see that most of the cars were on the upper decks - so cargo loading CERTAINLY is a factor too. Correct ballasting might of solved ALL of the problem. But it is entirely possible that even with all the ballast tanks full, the cargo loaded too high would result in an angle of lull.
  13. Seasmaster

    Seasmaster Senior Member

    Joined:
    May 25, 2016
    Messages:
    277
    Location:
    USA
    As one who sailed on that type of vessel for several years, and passed ships close-aboard in several ports, including Brunswick, I can assure you that almost all pilots are working "plan A", but have "plans b through d" in their head.
  14. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
  15. Seasmaster

    Seasmaster Senior Member

    Joined:
    May 25, 2016
    Messages:
    277
    Location:
    USA
    I'll say it again, and again. Too many cars on the upper decks. . . and, obviously, insufficient ballast. I worked as Chief Mate on these kind of vessels for 5 years. . .
    Oscarvan likes this.
  16. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,434
    Location:
    Fort Lauderdale
    I ran by this monstrosity about a week ago. I'd say that 2/3 of the ship is gone and only the midship section remains.
  17. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,735
    Location:
    Satsuma, FL
    3 of 8 sections are gone. They start back on cutting thru the ER next.
    I wonder if they are cutting thru the engine causing the issues back there.
  18. LM Viking

    LM Viking Member

    Joined:
    Sep 20, 2018
    Messages:
    141
    Location:
    Michigan
    You would think they would plan to avoid that but I read somewhere they had broken the chain 3 times on that cut before they disengaged for maintenance when I was there on February 20th. They then decided to go up front and take out section 2 just behind the bow section.
  19. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,735
    Location:
    Satsuma, FL
    Not sure the chain is working at all like they were planning.
    They are cutting lines of 6" holes in the hull sides to help keep the chain close to where they want the cut (rip). Even then the chain is still wondering.
    At best the chain is ripping, not cutting.
    I would of thought, in all the time it took to start working on this wreck, somebody would have welded some carbide teeth on the chain before it's use.