Click for Westport Click for Mulder Click for Burger Click for Mag Bay Click for Ocean Alexander

Ocean Yacht 46' Sunliner Owners Manual

Discussion in 'Ocean Yacht' started by kevhead, Jun 25, 2020.

You need to be registered and signed in to view this content.
  1. kevhead, Jun 25, 2020
    #1
    kevhead

    kevhead New Member

    Joined:
    Jun 12, 2016
    Messages:
    6
    Location:
    Illinois
    In the hunt for a Oceans Yacht 46' Sunliner Owners Manual. Thoughts?
  2. alvareza, Jun 25, 2020
    #2
    alvareza

    alvareza Member

    Joined:
    Aug 20, 2010
    Messages:
    145
    Location:
    Scituate MA
    I have been looking for a ‘04-‘07 46 SS manual. No joy so far. Suspect a 50 SS Manual would just as useful. Not sure whether it was printed, CD or only provided by request. Have you learned anything?
  3. kevhead, Jun 30, 2020
    #3
    kevhead

    kevhead New Member

    Joined:
    Jun 12, 2016
    Messages:
    6
    Location:
    Illinois
    No luck yet. Continue to look and am being vary wary of sites who claim to have manuals.
  4. cleanslate, Jun 30, 2020
    #4
    cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,648
    Location:
    Cherry Hill, NJ
    I don’t think one was ever made and if it was not sure if it offered any real valuable information....
    I don’t think they exist in my opinion.
    Not on the older oceans perhaps on the newer ones.
  5. alvareza, Jun 30, 2020
    #5
    alvareza

    alvareza Member

    Joined:
    Aug 20, 2010
    Messages:
    145
    Location:
    Scituate MA
    I was hoping for a wiring diagram to help try to solve a weird starting issue.

    When I start the port engine everything is fine. When I start the starboard engine all my 12v bridge electronics reset.

    My suspicion is that the batteries are being paralleled to start.

    I am going to to bite the bullet and spend a few hours tracing all the battery wires. Or start a new thread.
  6. chesapeake46, Jul 1, 2020
    #6
    chesapeake46

    chesapeake46 Senior Member

    Joined:
    Jul 26, 2009
    Messages:
    1,781
    Location:
    Chesapeake Bay, Delaware Bay & S.Jersey
    It may be that your starting current is sucking the voltage down to below the threshold voltage of the electronics.
    That may indicate you have a low battery , bad cell, bad connection.
    Load test the batteries and check your terminations.
  7. alvareza, Jul 1, 2020
    #7
    alvareza

    alvareza Member

    Joined:
    Aug 20, 2010
    Messages:
    145
    Location:
    Scituate MA
    Good idea. I will do that.
  8. cleanslate, Jul 1, 2020
    #8
    cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,648
    Location:
    Cherry Hill, NJ
    Yes , start with the battery terminals themselves and the wires and cables going to them give them a good cleaning and check the wires how they connect to the connectors for the battery they can break down from over the years of lots of starts and what not and surges of current along with corrosion it can cause a weak point.
  9. Capt J, Jul 2, 2020
    #9
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,434
    Location:
    Fort Lauderdale
    If you're batteries are older than 2.5 years it's probably the battery. BUT YES, Ocean parallels both battery banks to make 24 volts out of 12 volts on most of their boats.
  10. PamSails, Jul 6, 2020
    #10
    PamSails

    PamSails New Member

    Joined:
    Feb 24, 2018
    Messages:
    21
    Location:
    Annapolis, MD
    I have been looking for two years. The only thing I can do is copy whatever drawings or schematics are posted here.
  11. kevhead, Jul 6, 2020
    #11
    kevhead

    kevhead New Member

    Joined:
    Jun 12, 2016
    Messages:
    6
    Location:
    Illinois
    PamSails, I’m trying to find the y valve that directs the heads to the aft or forward holding tank. Trying to learn all i can about this new boat and peeking in all/any access hatches. Any thoughts on location?
  12. PamSails, Jul 13, 2020
    #12
    PamSails

    PamSails New Member

    Joined:
    Feb 24, 2018
    Messages:
    21
    Location:
    Annapolis, MD
    My boat does not have holding tanks. The plumbing for the fore head LectraSan is in the bilge directly in line from the center of the bed to the passage way to the dining galley. The plumbing for the aft head LectraSan is in two places, one in the bilge with the aft shower bilge pump and aft bilge pump, with the line from the commode to the LectraSan under the flooring to under the aft bed.