Click for Burger Click for Mulder Click for Abeking Click for Delta Click for Mulder

Checking what you have designed

Discussion in 'Yacht Designers Discussion' started by Teenna, Jul 4, 2006.

  1. Teenna

    Teenna New Member

    Joined:
    Jun 20, 2006
    Messages:
    93
    Location:
    Trinidad and Tobago
    Far to glorious we speak often regarding the designers. Here is a simple example of a failure design (Author: Tim Heywood), simply because done in 2D. It worked on a side profile, but once in reality and even shot with the unforgivable "tele" one can see that the rubrail doesn't look paralel any more to the water as the bow gets concave.

    No, ooops, its the water that doesn't respect the water line. No, wait, it's both...well it doesn't look right.

    Anyway, bow down is a common shipyard problem; when will designers stop using rullers and sit with a 3D guy for a minute, saying: "wait, let's give to a rubrail and bullwark an angle, just in case....") because, it's ALWAYS a designers fault! One should predict. :D

    (BTW, another "Pelorus"...no, wait, it's "Perfect Prescription"...no, wait, the wing stations are square... it's ....woaaah!)

    Attached Files:

    Last edited: Jul 4, 2006
  2. tartanski

    tartanski Member

    Joined:
    Nov 5, 2004
    Messages:
    116
    Location:
    Hamburg, Dunnon, Buzios
    Yeahhhhhhhhhhhhhhhh!!!!!! Down with 2D

    When will all the traditionalists learn we live in a 3D world that means....... 3D things and we see things in 3D. etc..

    :D
  3. AMG

    AMG YF Moderator

    Joined:
    Jul 26, 2004
    Messages:
    5,375
    Location:
    Sweden
    Sure,

    I´ll believe you when you show me a good looking yacht built from a 3D design...:rolleyes:

    Does anyone know if Redman Whiteley Dixon made the Ilona design in 3D?
  4. tartanski

    tartanski Member

    Joined:
    Nov 5, 2004
    Messages:
    116
    Location:
    Hamburg, Dunnon, Buzios
    3d2d again

    Ok AMG , will be hard for me to find that out,

    lets be straight here, the initial sketches will usually come from 2D, but the coordination and finalising design in 3D.

    Look at the Seaway Yachts,

    Shipman 50 and 60,

    http://www.shipman.dk/

    Skagen 50 and 65.

    Heesens Alumerica, was conceived in 3D, (debatable if a good looking yacht)

    http://www.heesenshipyards.nl/HEESE....aspx?ItemID=13&mid=347&tid=117&parameter=All

    Banneburg build 3D physical models of most of his, I hope before production :)

    but lets not start another 2d 3d discussion here :D
  5. Teenna

    Teenna New Member

    Joined:
    Jun 20, 2006
    Messages:
    93
    Location:
    Trinidad and Tobago
    I belive the new oceancos are all in 3D, I saw them on their site. It's Tim Heywood that doesn't model in 3d and one can see that. I belive that the "BIG" guys don't model in 3D, at least this is what one can see.
  6. AMG

    AMG YF Moderator

    Joined:
    Jul 26, 2004
    Messages:
    5,375
    Location:
    Sweden
    It was Teenna who started to say that 2D design was the problem with Kogo...

    3D-renderings and models can be great for selling a concept and 3D-files are necessary for CNC production. But for design I think 2D will rule until really good software appears...:)
  7. Teenna

    Teenna New Member

    Joined:
    Jun 20, 2006
    Messages:
    93
    Location:
    Trinidad and Tobago
    Sorry, but I had to...you see what happens otherwise...
  8. AMG

    AMG YF Moderator

    Joined:
    Jul 26, 2004
    Messages:
    5,375
    Location:
    Sweden
    I don´t mind this kind of discussions and this part of YachtForums is open for all of us to discuss yacht design.

    Regarding 3D, be it with a pen on a napkin or in a computer, it is mainly to visualize what the designer has in mind.

    To give a design the right dimensioning, we need a drawing board or a computer where it is drawn up in 2D. The 2D drawings can then be translated into 3D for manufacturing or just to see the yacht from all angles.

    A less good design can then be adjusted and I guess this is what Teenna is saying. But a good designer know at the 2D stage what the yacht will look like and the computer or the 3D program can not assist in this, rather the opposite according to some users who is claiming the final design can reveal which 3D-program was used...
  9. KCook

    KCook Senior Member

    Joined:
    Jun 24, 2005
    Messages:
    1,160
    Location:
    Phoenix
    Interesting points Lars.

    Another thing I wonder about, as an outsider. To what degree does the final yacht conform to the designer's original concept? Given that the design starts with a "designer" (who may not be an NA) and is then passed through a NA office to be put into working drawings. In the example Teena started this thread with: was that "error" (which I think is really nit-picking) owned by the designer or later imposed by an NA?

    Kelly Cook
  10. AMG

    AMG YF Moderator

    Joined:
    Jul 26, 2004
    Messages:
    5,375
    Location:
    Sweden
    I can not answer on behalf of Tim Heywood, but I believe we are using computers in the same way, making 2D drawings of all that you see above the waterline. The shipyard or an independent naval architect are then responsible for what you don´t see. Meaning the yacht should look more or less exactly as we present it to the buyer.

    On the 40-footer I am producing right now, the 3D-drawings made by another guy for the CNC-cutting, only differ by a few mm:s from my drawings. Nothing that change the appearance, more a result of how curves are drawn in different programs.
  11. KCook

    KCook Senior Member

    Joined:
    Jun 24, 2005
    Messages:
    1,160
    Location:
    Phoenix
    Thanks for the info Lars :)
  12. TomTom

    TomTom Member

    Joined:
    Jun 3, 2005
    Messages:
    32
    Location:
    Hamburg, Germany
    Tim Heywood Design 2d/3d

    As long as they can produce such equalized elegant vessels like the Carinthia VII (their) 2d-designing can't be so bad. The discussion ab. 2D and 3D looks somehow abstract. I am sure, they've got their lines in their heads. What they show their clients on which occasion seems to me as a personnel form of communikation. Some learned by aducation, some in the professionell traffic. And if - along that way - the client gets it in a drawn 2D-form or in a 3D-rendering is more ore less a the way that designer communicates.
    Famous real estate-architects hate computer graphics and loose their forms when looking at the capabilitis of the programs, and i am sure, famous yacht designer behave similar.

    Additional there comes the skill of making a good rendering into play - designing and presentating are two, sometimes very different things. Today most of the students grew up with computers, 3D-programs often are cheap and avaiable. So it is easy to predict, that more and more of them will simply design in 3D. No way to resume backwards, that an ugly vessel (perhaps only an ugly photo) is the result of 2D-designing. (This is no actual comment to the possible discussion inside many design-companies).
    Teena's post was a joke, yes?

    ts
    tsoe.com
  13. Teenna

    Teenna New Member

    Joined:
    Jun 20, 2006
    Messages:
    93
    Location:
    Trinidad and Tobago
    But did they? I hear that Carinthia has been on board much longer before Mr. Banneberg left the studio for good. To my information the "nice Tim Heywood" projects were all started under Bannenberg (let's not forget that Tim Heywood was doing his advertising at the beggining also with Limitless's bridge picture).

    I say the hand of the master is missing and one can notice this in the basic design elements. But this is only my eye perhaps, I might be wrong I'm not a designer. Perhaps this Kogo thing is acceptable and I'm being picky.

    As far the design process, it's like anything else, old Banneberg said a designer is like a conductor of the orchestra. If he doesn't hear all the team one might be playing bad and the whole sound picture will be ruined.

    My comment goes to the fact that a designer produces scetches, and renders and handles them to the yard rather than within it's own structure developes also a 3D and CONTROLS the design also in this tricky stage. because what's going to be built is not a render but a final 3D model. And here Tim heywood simply din't check all the angles and aspects of the Kogo design. If he did he would have noticed what today is notable on the photo above. It's always a designers fault.
  14. Mov-it!

    Mov-it! New Member

    Joined:
    Nov 8, 2005
    Messages:
    194
    Location:
    Katwijk Netherlands
    I've studied art history (fun, but pretty useless) and I've learned that the human mind is more likely to judge and accept proportions in 2D. This has something to do with the way our creative mind is developed. This starts at the very beginning when you use a pencil and paper and start scribbling on paper (or on the walls like my daughter). At this early stage you learn to tramsform your imagination to hand coordination.

    Bet you didn't think that the issue would go back this far?

    Once a drawing goes from 2D to 3D you add space to your concept. This is where 3D starts to make sence. It gives you an exact view of how an object is constructed. This allows you to make optimum use of the space available.
    This can prevent major flaws in the design.
    3D drawings still don't give an accurate view of the result.
    To really get a good feel of proportions and desing you would have to build a clay model. Nowadays you can use a 5 axis mill hooked to your 3D software that cuts an accurate clay model of you project. This is an amazing sight.
    I once watched a car model being cut by the mill. It took a couple of hours but it is amazing how out of this block of clay an object emerges.
  15. AMG

    AMG YF Moderator

    Joined:
    Jul 26, 2004
    Messages:
    5,375
    Location:
    Sweden
    To make it easier to understand how a design is made, I´ll show you some of what I am doing right now.

    At this stage the hull and deck moulds are already finished from the 3D-files I mentioned and I am doing some interior drawings. As you can see, I do this in 2D, however all three dimensions is present in my drawings too.

    So this is where I can see where the space is and how to use it. This is of course made to scale so I always have the right measurements indicated in the margin when I draw a line.

    There is no big difference in doing like this compared to making it as a full 3D-rendering, with the right program all my lines can snap together and become a volume. (Which I am not interested in...).

    In reality I think the designer is mainly halted by making 3D-renderings and when you see these computer generated "walk-through" interiors, what do you get out of it really? Do you get a true feeling of the volumes?

    No, I think the good thing with Computer Aided Design is that we can make changes very easy compared to paper drawings, we can make several solutions and play around on the screen until it looks good. Then the engineers and carpenters can use some of our files for Computer Aided Manufacturing, a fast and precise method to get all the pieces to fit together.

    This is CAD/CAM. Which is not the same as the 3D-design some Yacht Brokers love to show off with, even if we always did and always will design in three dimensions...:)

    Attached Files:

  16. jmr

    jmr New Member

    Joined:
    May 26, 2005
    Messages:
    52
    Location:
    Hamburg
    Yeah the discussion and the battle between 3D and 2D start again :p

    Some Tim Designs was done in a quick and dirty 3D modeling action by a 3D guy, before it was remodeled for real surface design for ENGINEERING purposes (Coordinating and Steelworks etc).

    Someone with good 2D sketching ability and good taste could do also 3D surface modeling.

    I myself did some 2D sketch actions some time ago and muss admit it is faster than 3D, even faster than the quick and dirty 3D one for presentation . For ENGINEERING purposes the yard should do in 3D or the project will go in trouble. I AM SURE OF IT!

    There is 2 yacht project I have to look on right now and I know what I am talking about ;-) My job is to take care of the engineers and drafters, who using a high end 3D CAD for both projects.


    cheers,


    JMR




  17. jmr

    jmr New Member

    Joined:
    May 26, 2005
    Messages:
    52
    Location:
    Hamburg
    This is my 2D rendering style done with a free software :)

    There maybe some flaws, since I am not a designer. Next post will show the surface model in 3D. To my experience modelling a yacht in 3D is much difficult than modelling a airplane or submarine, because the later is just a tube :-D

    I did some quick and dirty aircraft modelling for presentation and it took shorter than 1 day to model one aircraft.

    Interpreting a 2D sketch from a designer is not easy. Interpreting my own 2D sketch is easier, since I know what I want 8-D.

    Next post hopely I can show some rough 3D model of the sketch I made and some construction and coordinating work. This will take some time, since I have alot of work todo and I can do it only after 10 hours assisting my customers :-(


    cheers,


    Jos

    Attached Files:

  18. tartanski

    tartanski Member

    Joined:
    Nov 5, 2004
    Messages:
    116
    Location:
    Hamburg, Dunnon, Buzios
    What Designing in 3D really means

    Hello all, JMR and I have the unique advantage in this discussion that we work with the 2 most advanced 3D systems in the world.

    For us the thought of a 3D model for rendering is not the focus, of course this is one of the nice things you can do with a 3D model but at least for me, every yacht and ship constructor cringes when they see this type of 2D drawings with several section , plan and profile views.

    This is because you have no way to know if this will all fit together in 3D. Only at the time of production do you find this out. When the cost of the fix is usually quite high. Unfortunately this is the way the industry works and is considered completely normal especially on the production floor.

    Automotive constructors had the time and resources to find this out in the late 80/90s and immediately switched to full 3D and reaped the benefits. (although some times I cringe when i see how crammed the engine bay is of my car and can even get in to change a headlight bulb.:mad: , however cars are not built particularly for serviceability)

    today we are moving the yachting industry into full 3D , this means Ideally everything in 3D from the beginning, one model for conceptual design, Class design, and detailed design and even the **** renderings.:D

    In practice it starts off with a slow cultural change, :rolleyes:

    For example, General arrangement in 2D, Hull and Compartmentation in 3D,
    Classification design in 3D, Production drawing in 2D etc etc.

    The conceptual bit is the challenge with yacht constructors as they are more traditional than most of the other design industries.

    The designers who developed your tennis shoes or vacuum are very likely to have made a quick sketch then moved directly to 3D , either modelling clay or the new 3D quick modelling methods. Those CAD models eventually become the drivers for milling machines and so on.


    My point is that very few Yacht designers develop thier design directly in 3D, love it or hate it , it is the future.???!!!!
  19. jmr

    jmr New Member

    Joined:
    May 26, 2005
    Messages:
    52
    Location:
    Hamburg
    David,


    you are right! There is a slooow cultural change in shipyards too. Keep in mind that in 3D you build the ship digitaly, so expensive changes during the manufacturing could be avoided. Difficult would be as an example coodinating the AC Room at the front part of the ship (near the bow). It has small space and lots of frames and the steel hull with large curvature too. How would you coordinating in 2D for such conditions? By guessing? Why guessing if you CAN SEE it in 3D and rotating the whole ship (yes the whole ship) with your spacemouse :cool:. Every engineer and drafter, who do previosly their work with 2D system will never want go back to 2D after they smell a 3D system :)

    3D Renderings is just a small part of a high end CADCAM system. For renderings and marketing presentation you could take other 3D system based on NURBS or Subdivisions which cost between 800-4000 Euros (there is also a free subdivisions application somewhere in the internet!)


    cheers,


    Jos


  20. KCook

    KCook Senior Member

    Joined:
    Jun 24, 2005
    Messages:
    1,160
    Location:
    Phoenix
    In that case the future may be devoid of independent designers? Given what your most advanced 3D systems in the world cost.

    Kelly