Click for Perko Click for Mag Bay Click for Glendinning Click for Mulder Click for Mulder

Viking Princess question

Discussion in 'Princess Yacht' started by DJANNA, Oct 3, 2018.

You need to be registered and signed in to view this content.
  1. DJANNA

    DJANNA New Member

    Joined:
    Jul 4, 2016
    Messages:
    3
    does anyone have a schematic for a ‘97 46ft. Viking Princess Sport Cruiser..help needed
  2. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Have you tried contacting Princess Yachts? I don't have the schematic, but what are you trying to track down or figure out in regards to the wiring?
  3. DJANNA

    DJANNA New Member

    Joined:
    Jul 4, 2016
    Messages:
    3
    have a 46 Viking princess Sport Cruiser ‘97...any one know how to get to bow thruster thru the boat...looking for propeller numbers.....
  4. DJANNA

    DJANNA New Member

    Joined:
    Jul 4, 2016
    Messages:
    3
    Right now looking on how to get to bow thruster inside boat. The company did not have a schematic from this year...just frustrating to look for all
  5. T.K.

    T.K. Senior Member

    Joined:
    Jan 31, 2007
    Messages:
    1,013
    Location:
    Cairo - Egypt
    You will find a hatch below the forward cabin carpet just in front of the bed. Open the hatch and look inside. You should find the bow thruster electrical motor.
  6. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Probably have to pull up the carpet in the forward stateroom and under that will probably be a hatch.
  7. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    There is access. Moving the stuff out of the way to find it could be the issue.

    Also, no need for dual threads.
  8. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,120
    Location:
    Miami, FL
    The first thing any new owner should do is find every single hatch and access panel to all machinery and system especially thru hulls.

    Every thruster I ve seen was accessible thru a floor hatch or under a bed. You also need to find where the emergency shut off / reset switch is just in case of a malfunction. It should be in the same area

    Along the same line, fine the windlass circuit breaker... you want to know where it is before it trips on a windy day as you’re drifting with the anchor half way up.