Click for Delta Click for YF Listing Service Click for Ocean Alexander Click for Walker Click for MotorCheck

Bertram 50/54

Discussion in 'Bertram Yacht' started by BrandName, Jun 15, 2006.

You need to be registered and signed in to view this content.
  1. coffee break

    coffee break New Member

    Joined:
    Nov 21, 2010
    Messages:
    12
    Location:
    ny, ny



    love to hear tips on how to deal with banks!!!
  2. coffee break

    coffee break New Member

    Joined:
    Nov 21, 2010
    Messages:
    12
    Location:
    ny, ny
    Dave,
    did you sell your 50 Bert?
    Which ride you like best, Bert or Hatt?
    Capt Joe
  3. coffee break

    coffee break New Member

    Joined:
    Nov 21, 2010
    Messages:
    12
    Location:
    ny, ny

    Mike
    here is a video of the 46 I rebuilted
    Hope you like it
    http://www.youtube.com/watch?v=rJE6FBZPKLY
    Joe
  4. Ocean54k3

    Ocean54k3 New Member

    Joined:
    Jul 11, 2010
    Messages:
    8
    Location:
    North Palm Beach, Fl
    54 Bert speed

    Our 54, ex-Dolphin, now DOG HOUSE, has the 800hp BKX 12v71ti's and is swinging 28x28 4 blades, full tower. She does indeed cruise 25 kts @ 1950 rpms, though we usually run her at 1700 and get 21.5 kts on the GPS. Here in the Palm Beach area, no need for long runs to the fishing grounds, 10 miles is about max for us, so taking it easy on the fuel burn is a nice option. I was pleasantly surprised at her speed, she did 29.5 kts @ 2350 rpms on our sea trial with about 900 gallons of fuel aboard. Tabs all the way down, if conditions permit, gives her a 2 knot boost at cruise. Great sea boat, raises fish well, too!
    Looking forward to sailfish season.
    Cheers,
    Tom
  5. Ormond Bert54

    Ormond Bert54 Senior Member

    Joined:
    Mar 29, 2009
    Messages:
    470
    Location:
    Ormond Beach, FL
    This is some excellent information as those are the same engines/same boat I have. Was a propulsion study done before deciding on the 28x28 4 blades? Where did you get the props and how much might I expect to pay?
  6. coffee break

    coffee break New Member

    Joined:
    Nov 21, 2010
    Messages:
    12
    Location:
    ny, ny
    Mike
    Dog House is the boat I was talking about! I know the ex captain and mate of that boat and I couldn't believe when they where telling me that they where getting that performance!
    Anyway, great job Dog House and good luck with it, she was well taking care of.
    I considered buying it was was a bit too vintage for me and what I want to do with it.
    Joe
  7. Ocean54k3

    Ocean54k3 New Member

    Joined:
    Jul 11, 2010
    Messages:
    8
    Location:
    North Palm Beach, Fl
    54 wheels

    Bayside Bert, the wheels on the boat were on her when we bought her. No spares. We measured them at haul-out survey, and no reason to change as of now. I honestly don't know if she's faster than others, but needless to say, we are very happy with her performance, very smooth and quickly on plane.
    Tom
  8. Ormond Bert54

    Ormond Bert54 Senior Member

    Joined:
    Mar 29, 2009
    Messages:
    470
    Location:
    Ormond Beach, FL
    Seems to be a good setup ... certainly faster than mine. The performance you are seeing is my goal. Thanks
  9. Ocean54k3

    Ocean54k3 New Member

    Joined:
    Jul 11, 2010
    Messages:
    8
    Location:
    North Palm Beach, Fl
    5 blades

    For what it's worth...Took a look at an '87 54 in a local boatyard. She was equipped wit 33"x35.5" 5 bladed props. No one was around to talk to about her power and performance. I would assume she is a 12v92 powered boat.
  10. DaggersTT

    DaggersTT New Member

    Joined:
    Dec 5, 2010
    Messages:
    1
    Location:
    TTYC, Port of Spain
    Ensign Digital Tach/Sync

    I am upgrading from the best Bertram 35 in the Caribbean (ps she is for sale) to a 1989 Bertram 54.
    One of the items on the snag list, is the Ensign Digital Tachometer's liquid chrystal is almost unreadable.

    Would anyone know where i can either get a new Liquid chrystal for this, or get a new or used unit in good condition ??
  11. Ormond Bert54

    Ormond Bert54 Senior Member

    Joined:
    Mar 29, 2009
    Messages:
    470
    Location:
    Ormond Beach, FL
    Danny at High Tide Marine is very helpful. 305-743-0269
    hightidedp@aol.com

    Thinking back on some of the simple mistakes that have been made along the way on my boat by seemingly capable technicians ... Danny has been able to steer me correctly on many decisions and he has the correct parts.

    For instance ... had a technician install a couple of 3/4 hp Star Rite pumps ... one for fresh water and one for the salt water wash down ... problem is, the original part was a 1/2 hp so the circuit breaker kept popping when I would run one of the pumps.

    Minimize trouble by getting the correct parts. Danny has also been able to help with some of the more complex issues (like a malfunctioning alarm circuit board). by referring me to the engineer who designed the board!

    Danny is a good man.

    Good luck with the new boat.

    Mike
  12. Capt GM

    Capt GM Guest

    Looking to purchase a 1988 50' Bertram with 8v92 s 735 hp each . Could anyone give any advice on the good & bad on this model , also spoke with broker and was told the fly bright has a spongy deck( water insertion I guess )
  13. geriksen

    geriksen Senior Member

    Joined:
    Jul 24, 2007
    Messages:
    175
    Location:
    San Juan Puerto Rico
    Looking to purchase a 50 with MAN's or a late 80' 54. Does anyone have any opinions on the 12V71's vs the 12V92's on the 54? I have found a few 54's I really like but I am trying to figure out if I should hold out for the right boat with the 1100hp 12V92's. I had a 46.6 with 8V92's and it always felt underpowered. I can't imagine a 50 with those engines. Thanks!
  14. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    Capt GM
    I'm sad nobody got back to you. How did it work out for you?
    ,rc
  15. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    Please do some searches on YF.
    I'm a 71 fan. They are the most forgiving engine of all.
    The 92 is not forgiving and may require more maintenance.
    I think most agree with this but there is a large fan base of 92s.
    Bamboo ran a 92 ship and reported in often with good reports. Of course, that Donzi was cared for with all luv and care.

    All keep asking, and more replies will come back.

    ,rc
  16. Trinimax

    Trinimax Senior Member

    Joined:
    Jan 18, 2010
    Messages:
    237
    Location:
    Trinidad and Tobago Yacht club
    I believe that there are a few 50's on the market that are powered by 900 hp 12v71's, however I have heard that the extra engine weight, size and larger shaft size etc resulted in a cramped engine room, with higher fuel burn and not much gain in speed. I believe that the 50 with 12v71's should touch 30 knots and cruise easily in the low to mid 20's. I agree with you on your concerns about the 50 with 8v92's being underpowered. I know of '3' 50's down here in Trinidad powered by 8v92's and I think the best top speed they see is about 27 knts with not much fuel and fresh bottom paint. So realistically they are a 25 knot boat with a 20 knot cruise at 1850 rpm.
    with regards to the 54. from what i have heard from one of local captains here in Trinidad, the 54 powered by 900 hp 12v71s will break 30 knots and cruise in the mid 20's and that is a boat with a full tower. the 54's powered by 12v92's will do a little better on speed, but with the expense of larger engines making the engineroom a bit tighter.

    hope this information is useful, and good luck with your search
  17. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    The 54' I ran with 12v92's didn't do any better on speed than a 12v71 boat. It only had a hardtop as well. It would do 23 knots at 1900 rpms.....2300 rpms it only hit 27 knots I think. I'd rather have 12v71's any day over 12v92's. Also if you run the 12v71's at 1900 or 1950 (providing they're propped to achieve over 2300 fully loaded wot), you're doing the same speed as a 12v92 boat at 1850. I've found running the 12v92's at 1850 doesn't do them any favors in the longevity department over running them a little higher at say 1900-1950rpms.
  18. g collis

    g collis Member

    Joined:
    Jul 15, 2015
    Messages:
    127
    Location:
    Saint Simons Island Georgia
    I had a Bertram 54' convertible with 12v71TI's in her. She ran like a top. I forget the HP exactly, but I think they were 950hp. She would do upwards of 36 knots with half fuel load. As Ralph says, 71's are a VERY forgiving motors and not as maintenance intensive as a 92 motor. Personally, I shy away from MAN's. Hard to get repaired and very expensive to maintain and repair. You can get a Detroit part virtually anywhere, CAT as well. MAN, not so much and even harder to find a mechanic. I have a 55' Hatt SF with 1271TI's in her. Small hp, only 650. But I really could careless how fast she will go. We run her at 10-12knots. Open her up occasionally to blow out the soot. Hatteras is a heavier boat than an old 54' Bert like I had. Good luck.
  19. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    71s rule.
  20. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    LOLOL, this reminds me of a 54' Bertram I ran a few times many years ago. It had 6500 hours without rebuilds. When you started it, it would grey smoke for 15 minutes so bad you could not see behind the transom and sometimes had to go inside or 100' from the boat till it warmed up. Engine surveyor said there were no hash marks left whatsoever in the liners. It got up and ran over 30 knots WOT. LOLOLOL Had 12v71's.