Click for Furuno Click for Mulder Click for Walker Click for Abeking Click for Nordhavn

1998 445 Carver aft cabin - dinette table issue

Discussion in 'Carver Yacht' started by Shall, Mar 30, 2015.

You need to be registered and signed in to view this content.
  1. Shall, Mar 30, 2015
    #1
    Shall

    Shall New Member

    Joined:
    Mar 30, 2015
    Messages:
    1
    Location:
    Old Hickory TN
    Bought 445 last year & cannot figure any way to lower the dinette table to make a sleeping berth. Table is not symmetrical so appears would be very difficult to make a new slightly smaller version that would drop into position. Anyone have experience with this?
  2. Rene Dupuis, Feb 7, 2016
    #2
    Rene Dupuis

    Rene Dupuis New Member

    Joined:
    Jan 5, 2016
    Messages:
    7
    Location:
    Mystic Ct
    Hi there
    Can't help you with the dinette table but I do have a question to ask.
    I am looking to buy a 42 or 44 aft cabin carver for the loop.
    My question is when you anchor and assuming a bit of wind.. will the boat point into the wind or will it swing from side to side?
    Thanks
    Rene
  3. Good Spirit, Feb 18, 2016
    #3
    Good Spirit

    Good Spirit Member

    Joined:
    Nov 4, 2012
    Messages:
    117
    Location:
    Northern harbour lake of the woods Ontario Canada
    It will point to the wind but you will also swing depending on the direction and strength of the winds. You will want to ensure that you are protected from the prevailing wids whenever you anchor out . You also need to factor the amount of rode you have out and your proximity to other boats. Hope this helps