Click for Burger Click for Cross Click for Mulder Click for Westport Click for Glendinning

3207 hatch to salon

Discussion in 'Carver Yacht' started by sjbromo, Nov 27, 2015.

You need to be registered and signed in to view this content.
  1. sjbromo, Nov 27, 2015
    #1
    sjbromo

    sjbromo New Member

    Joined:
    Jun 3, 2013
    Messages:
    5
    Location:
    Holland Mi
    This winter storage season I decided to re-finish the folding hatch going down to the salon. Thinking it was solid wood I sanded to hard only to find out the top is only a veneer. Now I have major blemishes were the finish needed some extra attention. Any ideas, thinking of a self adhesive veneer. What species would it be, thought teak, but would teak veneer accept my varnish. Ideas, suggestions. The admiral is really pissed. " if if ain't broke, don't fix it". To much time on my hands. Tried to upload a pic, can't figure it out.
  2. Good Spirit, Nov 27, 2015
    #2
    Good Spirit

    Good Spirit Member

    Joined:
    Nov 4, 2012
    Messages:
    117
    Location:
    Northern harbour lake of the woods Ontario Canada
    You should be able to find a teak plywood piece and replace the entire hatch. And yes it will take your varnish. I have used it for some trim pieces on my 3608
  3. sjbromo, Nov 28, 2015
    #3
    sjbromo

    sjbromo New Member

    Joined:
    Jun 3, 2013
    Messages:
    5
    Location:
    Holland Mi
    Thanks for the reply, a little above my skill level, found some 1/64" veneer in cherry, looking for a source for teak veneer
  4. g36, Dec 1, 2015
    #4
    g36

    g36 Member

    Joined:
    Aug 7, 2013
    Messages:
    70
    Location:
    chattanooga
    if you want to use veneer then google "teak veneer" you will see a plethora of websites to pick from, even ebay