Click for Abeking Click for Nordhavn Click for Glendinning Click for Walker Click for Nordhavn

1999 carver 450 voyager Marquipt davit

Discussion in 'Carver Yacht' started by Monepit, Apr 10, 2015.

You need to be registered and signed in to view this content.
  1. Monepit, Apr 10, 2015
    #1
    Monepit

    Monepit Member

    Joined:
    May 27, 2013
    Messages:
    146
    Location:
    Evansville, in
    Does Anyone with a 450 voyager know how the Davit is mounted? I have the Marquipt Davit on the back of the bridge. It looks lite the pole below the mount is only about 18 inches long with the base mounted on the top deck. I can't imagine that the pole doesn't go through the roof to the lower deck. Marquipt says the pole needs to be a minimum of 60 inches long. I can't tell fore sure without major dismantling. Any help would be greatly appreciated.
  2. Monepit, Apr 16, 2015
    #2
    Monepit

    Monepit Member

    Joined:
    May 27, 2013
    Messages:
    146
    Location:
    Evansville, in
    After further research on Marquipts part. The Davit is installed correctly. They traced back blueprints and the Davit was engineered to have a 10 inch down pole mounted on the top deck and it was installed by carver at the factory. Marquipts was a great help.