Click for Furuno Click for Nordhavn Click for Perko Click for Mulder Click for Ocean Alexander

Onan 6.5 Gen-Set

Discussion in 'Carver Yacht' started by Maybe Knot, Sep 12, 2014.

You need to be registered and signed in to view this content.
  1. Maybe Knot

    Maybe Knot Member

    Joined:
    Apr 28, 2014
    Messages:
    66
    Location:
    Nashville Tn
    I can't remember where I first posted my problems with this generator, but it doesn't matter, this is an fyi thread anyway.

    When I bought my boat, the previous owner had removed the starter. I assume it was due to a problem and he couldn't find a replacement. I have encountered the same problem, until now.

    The 80's model white Onan 6.5 Gen-Set is what I have. The Onan part number for the starter is 191-1246. While that part has been discontinued since 1993, I have found a replacement. Wilson starters are USA made, and available at O'Reilly's and Auto-Zone. The replacement part number at Wilson is 91-06-1895. You can find them online in the 235.00 range and retail at the 300.00 range. Finding this is truly a needle in a haystack matter.
  2. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,726
    Location:
    Satsuma, FL
  3. 61c40

    61c40 Member

    Joined:
    Feb 15, 2009
    Messages:
    79
    Location:
    Great Lakes
    Please be cautious!!!! it's probably not a ignition proof starter! Just because the bolt pattern matches doesn't mean is approved for a engine compartment! It could be a gas leak ignition source
  4. Maybe Knot

    Maybe Knot Member

    Joined:
    Apr 28, 2014
    Messages:
    66
    Location:
    Nashville Tn
    It is advertised to replace part # 191-1246. I am only assuming that the original was a marine part, so the latter has to be also.
  5. Maybe Knot

    Maybe Knot Member

    Joined:
    Apr 28, 2014
    Messages:
    66
    Location:
    Nashville Tn