Click for Northern Lights Click for Cross Click for Westport Click for Burger Click for Perko

Stuart boat lift; marine or yard w/ travel lift

Discussion in 'General Yachting Discussion' started by Capt Ralph, Oct 26, 2013.

You need to be registered and signed in to view this content.
  1. Capt Ralph, Oct 26, 2013
    #1
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,748
    Location:
    Satsuma, FL
    Just getting some info on a delivery. Not many details yet but coming thru the Okeechobee waterway (West to East) November / December.
    Once on the Florida east coast, need haul, bottom, and provisioning before tripping thru the islands.
    Is there a convenient boat yard near the east end that can pick up a 74 x 20?
    I remember looking down from southbound I-95 (over the waterway) and seeing a large yard but it looked a bit fine and expensive.
    thx,
    rc
  2. Capt J, Oct 26, 2013
    #2
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,435
    Location:
    Fort Lauderdale
    There are several. Hinckley is big fine and expensive. But there are others.....I can't think of their names, but they're ok. There's also ACY right before you get to Stuart that does good work.....
  3. Carver440, Oct 28, 2013
    #3
    Carver440

    Carver440 New Member

    Joined:
    May 5, 2006
    Messages:
    18
    Location:
    Cleveland, OH
    Hinkley boat works or Whittaker Marine. Whittaker handles Fleming repairs. I have had good work performed by both.
  4. Kafue, Oct 28, 2013
    #4
    Kafue

    Kafue Senior Member

    Joined:
    Nov 29, 2006
    Messages:
    1,164
    Location:
    Gold Coast Australia
    Avoid Sailfish Marina. They damaged my boat and did not care!
  5. Capt Ralph, Oct 28, 2013
    #5
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,748
    Location:
    Satsuma, FL
    Well, some of these names can not handle over 18-19 beams. Thank for for the thoughts anyway.
    ,rc
  6. Capt J, Oct 28, 2013
    #6
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,435
    Location:
    Fort Lauderdale
    Both Hinkley and ACY can. I worked on a 98' LRMY and a 75' Jim Smith SF and they were both hauled there. ACY hauls 100'+ vessels as well.
  7. captaintilt, Oct 29, 2013
    #7
    captaintilt

    captaintilt Senior Member

    Joined:
    Jan 4, 2012
    Messages:
    219
    Location:
    Great Lakes / Florida
    I've been through ACY on a 108' Sunseeker and they did great work! Very knowledgeable and reasonable with costs. Highly recommended.