Click for JetForums Click for Delta Click for Cross Click for Westport Click for Walker

The whole story

Discussion in 'Chris Craft Roamer Yacht' started by Oneiros, Dec 12, 2009.

  1. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    Hello!
    This is my best Christmas gift thank you so very much I will write to her and I hope to get a complete documentation once again a big thank you
    Eric Finni
  2. K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,388
    Location:
    My Office
    Hi,

    Don't be too surprised to find that Kelly is a man.

    It is not an unknown male name in the US.
  3. Maxwell

    Maxwell Senior Member

    Joined:
    Sep 16, 2010
    Messages:
    194
    Location:
    Door County, WI
    Good point k1w1...

    Erik, if you google their name it seems that he is a doctor here in WI and you can probably find his telephone # as well.

    I've only been in Milwaukee for a couple of years (actually moved back here from stockholm area) but I asked a few people around our club if the knew of him but nobody did.

    Good luck!!
  4. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    Hello!
    You are so right I've seen a few movies as a woman and man can be called Kelly I have already e-mail to her for what seems to be a woman because she lives with a man but who knows in these times lol I'm just so happy I learned a little about the previous owner so with old cars and boats, they get a different value if I know a little about their history
    Eric Finni
  5. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    Stockholm in sweden? nice
  6. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    Hey now, I have get ​​contact with the previous owner of our boat, unfortunately, he had only had her a short time but I have gained valuable information about the boat's history and stuff like that's really funny.
    Erik the Swed
    Last edited: Jan 23, 2012
  7. Aspivek

    Aspivek New Member

    Joined:
    Sep 19, 2010
    Messages:
    16
    Location:
    Racine, WI
    Erik,

    I am orginally from Waukesha WI, which is next to Sussex...

    My parents had a 35' Bayliner while I was growing up and I remember your boat from then, I think I even have some pictures of it from the early 90's
    there were a few 37' Roamers in Milwaukee back then but I think this one was the only flybridge. My dad was friends with one of the guys who had another 37' and he always talked about this one saying he wished he could put diesels in his.
  8. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    Hello!
    but how wonderful I think I've won the lottery I have traced the previous owner and he has told us much about our boat, unfortunately, he had only a few months in 2005 what wonderful that you have seen her in the 90's I would be so happy if you can tell you more about her, your parents may have some clues like pictures of the boat
    my wife and I have really made a journey from the time we decided to buy her, I have not put so many pictures recently, but the project rolls on and I'll try to post more pictures now, I agree to replace all wood with grid
    Moreover, should I replace the rudder tubes, I can see that you also work with your Roamer, you have no pictures of the
    Erik the Swed
  9. Aspivek

    Aspivek New Member

    Joined:
    Sep 19, 2010
    Messages:
    16
    Location:
    Racine, WI
    Erik,

    Ill see if I can dig up some pictures and ill ask my dad if he remembers anything on it, its a unique boat and I'm glad to see it all fixed up and returned to her former glory! I love the styling of the Rivieras and I hope to get one some day if I ever get mine finished.

    -Andrew
  10. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    Hi!
    sounds great its so nice to know the history of her
    Erik
  11. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    old pic

    The head eletric pic from 07 yes now I´m on the track

    Attached Files:

    • 10.jpg
      10.jpg
      File size:
      23 KB
      Views:
      1,077
    • 12.jpg
      12.jpg
      File size:
      52 KB
      Views:
      1,081
    • 13.jpg
      13.jpg
      File size:
      38.4 KB
      Views:
      1,081
    • 14.jpg
      14.jpg
      File size:
      49.6 KB
      Views:
      1,096
    • 15.jpg
      15.jpg
      File size:
      32.1 KB
      Views:
      1,068
  12. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    More pic

    Hi!
    pic from 2010

    Attached Files:

  13. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    mmore pic

    shaft joint

    Attached Files:

  14. artwork

    artwork Member

    Joined:
    Feb 19, 2006
    Messages:
    55
    Location:
    Underway
    thrust bearing

    Erik, where did you find the 'universal' joints? Are they something you made? can you post pictures from the other side of the plate you installed. What kind of bearing is installed there?
    Art
  15. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    hello
    I have built the entire unit. My friend Mike made ​​the most he has a nice workshop
    ball bearing is a thrust bearing that takes up the entire propeller force the double universal joints is from a Cadillac entire unit will cost $ 700 factory-applied cost $ 3000 Aqua Drive is the name a Swedish invention. No more vibration you can install soft engine mounts I've just installed it on the starboard engine, but this spring is the time and fix the other engine I'm going to photograph the entire unit so you can see what it looks like this year I will replace the seals to both propeller shafts . hope you understand my bad English.http://www.aquadrive.com/
    Erik the swed
  16. K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,388
    Location:
    My Office
    Hi.

    It is a simple CV joint , some of the particulars might vary but these can be found in a lot of junk yards.
  17. artwork

    artwork Member

    Joined:
    Feb 19, 2006
    Messages:
    55
    Location:
    Underway
    CV joint, Ahhhh.

    Kiwi, Thanks for that info. My limited automotive experience was back when cars were rear wheel drive only and our 'universal joints' were only half of what I see here. I had never seen a CV joint.

    I was considering an Aqua-Drive, but cringed at the cost.

    Erik, don't appologize for your English. You're doing great. The only Swedish words I know is smorgasbord and Saab ! They do not come into a boating conversation very often.
  18. K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,388
    Location:
    My Office
    Hi,

    If you are going to have a go at building one search the net for Double Cardan U Joint. Here is a link to photos of them.

    double cardan u joints - Google Search

    The basic parts are exactly the same as in your old cars drive shaft, the UJ's are just closer together.

    The Steel Plate behind the Coupling in the Photo from Onerios is where he has his thrust bearing mounted, this is not a part of the double U Joint and will be something you need to deal with as well if you are making one up.
  19. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    Hi
    SAAB stands for Swedish airplanes company they built the aircraft and it looks at how well these cars are designed
    ok back to the propeller shafts there are any other manufacturers that you can check out. I'm a bit of an inventor and be able to self build on our boat gives me a lot, we have lots of snow so in two weeks I'll start with my boat projects then I can shoot pictures of all the parts for universal joints
    Erik Finni
  20. Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    some pic

    hi found some pic on the drive

    Attached Files: