Click for Westport Cick to Clean Black Water Click for Perko Click for Westport Click for Burger

Roamer 37 is Finally Launched

Discussion in 'Chris Craft Roamer Yacht' started by davidopie, Jun 13, 2011.

You need to be registered and signed in to view this content.
Page 1 of 2
  1. davidopie, Jun 13, 2011
    #1
    davidopie

    davidopie New Member

    Joined:
    Aug 19, 2007
    Messages:
    24
    Location:
    Annapolis, MD
    This Roamer is finally back in the water and running!

    I bought it in 2003 and am finally putting final parts and pieces back on her. It's running quite well:
    3200 RPM 22 knots
    3500 RPM 25 Knots

    I haven't pushed it any harder than that. We've been trying it out on the upper Severn River and (twice!) down to Annapolis.

    Upgrades include:
    New wiring and breakers
    Stripped hull and painted
    All new glass
    New aft deck
    Stripped interior wood and varnished
    Two used Crusader 454's with rebuilt velvet drives
    Upholstery is new
    blah, blah.

    It took longer to finish than I expected. It cost more money than my wife expected. (and actually, more than she knows!! ssshhh.)

    Attached Files:

  2. Ormond Bert54, Jun 13, 2011
    #2
    Ormond Bert54

    Ormond Bert54 Senior Member

    Joined:
    Mar 29, 2009
    Messages:
    470
    Location:
    Ormond Beach, FL
    She looks great!! Hope to see her in person someday as I'm not far ... Herrington Harbour and make it to Annapolis regularly (once my boat is back in the water).

    Wow ... that helm panel with the wheel, old fashioned gauges etc. is truly fantastic.

    Enjoy the summer ... I'm hoping to be in the water come September.
  3. YachtForums, Jun 13, 2011
    #3
    YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,766
    Location:
    South Florida
    Congrats! Looks great!!
  4. Savasa, Jun 14, 2011
    #4
    Savasa

    Savasa Senior Member

    Joined:
    Jun 4, 2008
    Messages:
    167
    Location:
    Iqaluit, Nunavit, Canada
    VERY nice work!
  5. nemehoto, Jun 14, 2011
    #5
    nemehoto

    nemehoto New Member

    Joined:
    Oct 19, 2010
    Messages:
    16
    Location:
    Orangeburg SC
    Very nice work! Lovely boat.
  6. Oneiros, Jun 15, 2011
    #6
    Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    OH so nice job hope you have more pic
    Erik
  7. doug p, Jun 17, 2011
    #7
    doug p

    doug p Member

    Joined:
    Jan 31, 2009
    Messages:
    38
    Location:
    PNW
    Atta Boy
  8. *JU, Jun 17, 2011
    #8
    *JU

    *JU New Member

    Joined:
    Feb 16, 2010
    Messages:
    27
    Location:
    MN, AZ
    Very nice!!!!
    The more photo's the merrier! :D
  9. davidopie, Jun 19, 2011
    #9
    davidopie

    davidopie New Member

    Joined:
    Aug 19, 2007
    Messages:
    24
    Location:
    Annapolis, MD
    More pictures of Roamer 37

    Pictures are from yesterday's dinner cruise on the Severn.

    Notice how the young crew stays alert, helping the captain avoid river-hazards. I don't think the original Roamers came with game consoles.

    Attached Files:

  10. homer1958, Jun 19, 2011
    #10
    homer1958

    homer1958 Member

    Joined:
    Feb 10, 2009
    Messages:
    481
    Location:
    Annapolis MD
    Congratulations David!

    Well, yesterday must have been a great day! Looks very nice.. I remember years ago when she was at Liberty. I wondered what happend to her?

    If you are propped/geared right, you should have 5 more knots to go. I had that same power and she would hit 35 MPH if she was light clean and perfect.

    Don't feel bad... we started 7 years ago and are almost done... interior and decking being done next... lost down South... the labor situation/attitude around Annapolis and the Easter Shore was so challenged I got it out of there and have not had any headaches since with crafts/trades ect.

    I have a lot of parts.. let me know if you need something I might just have it or know where it is to be found.

    Might be back-up in the Fall.

    Thanks for bringing another Roamer back to life! You can't even buy an aluminum Rivie 37/38 anymore.. good luck finding one. They all got snapped up I think. You must have one of the first 37 Aluminum's ever built or darn close.

    Homer
  11. davidopie, Jun 20, 2011
    #11
    davidopie

    davidopie New Member

    Joined:
    Aug 19, 2007
    Messages:
    24
    Location:
    Annapolis, MD
    One more photo...

    The Roamer is testing the Severn River sand bars...

    Attached Files:

  12. davidopie, Jun 20, 2011
    #12
    davidopie

    davidopie New Member

    Joined:
    Aug 19, 2007
    Messages:
    24
    Location:
    Annapolis, MD
    Parts?

    Homer,
    I am missing a couple things. Do you have an extra drawer from the galley? Also, I am missing some of the rail latch hardware. Finally, if you have extra helm seats, I could use two. Otherwise, I am going to buy tw onew ones from Garelick.

    Thanks, and I hope to see you up here with your Roamer.
    David
  13. Oneiros, Jun 20, 2011
    #13
    Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    Oh so Nice!
  14. Oneiros, Jun 20, 2011
    #14
    Oneiros

    Oneiros Member

    Joined:
    Dec 17, 2006
    Messages:
    299
    Location:
    lulea Sweden the land of the midnightsun
    Hello Homer! long time no see if you have a wheel with a ring around the it Im intresting to bye it.
    Erik the Swed
  15. homer1958, Jun 25, 2011
    #15
    homer1958

    homer1958 Member

    Joined:
    Feb 10, 2009
    Messages:
    481
    Location:
    Annapolis MD
    Roamer Seats

    Perko parts for taft rail.. easy to get at Chris Parts

    I have a real nice set of seats.. Helm and Nav (both)

    These are in very good condition, were re-upolstered by my dad years ago.. better foam ect.

    I have them here in storage.. $100 for both if you want them, but I do not have the stainless steel posts, but the female post holders are there screwed into the seats.

    I can send photos pf them if you want first.

    I do not have kitchen drawer, but do have old gas cap and bases... those are nice quality.
  16. davidopie, Jun 25, 2011
    #16
    davidopie

    davidopie New Member

    Joined:
    Aug 19, 2007
    Messages:
    24
    Location:
    Annapolis, MD
    Sure. I'll take the seats.

    How do you want to organize exchange? I can be reached at davidopie <at> gmail <dot> com


    Thanks!
  17. davidopie, Jun 27, 2011
    #17
    davidopie

    davidopie New Member

    Joined:
    Aug 19, 2007
    Messages:
    24
    Location:
    Annapolis, MD
    Roamer Nation,
    It was another wonderful weekend on the water with that fine vessel. I connected the synchronizer this weekend. That's one great invention! Further, the use of the synchronizer confirmed that the tachometers are not quite the same ( about 200 RPM to 300 RPM off). That's ok.

    Question: I am getting a bunch of sediment from the tanks in the filters (and water seperator) that is coming from the tanks. I had the tanks "cleaned" and pressure tested. How to clean out the tanks?

    I am considering buying a fuel pump, connecting a filter inline with the pump, and using a stiff hose into the tanks to try and collect this sediment.

    Any ideas from the Roamer Nation?
  18. jflongwell, Jun 29, 2011
    #18
    jflongwell

    jflongwell Member

    Joined:
    Aug 27, 2008
    Messages:
    57
    Location:
    Watkins Glen on Seneca Lake
    Kitchen Drawer

    We removed the oven and cut an opening to allow the fridge to go there. There was a drawer under the oven that was also removed.
    What size is the drawer you need?
    John
  19. davidopie, Jun 29, 2011
    #19
    davidopie

    davidopie New Member

    Joined:
    Aug 19, 2007
    Messages:
    24
    Location:
    Annapolis, MD
    Drawer

    The drawer I am looking for is one of the small ones that was originally in the corner of the galley.

    Thanks!
    David
  20. davidopie, Jul 5, 2011
    #20
    davidopie

    davidopie New Member

    Joined:
    Aug 19, 2007
    Messages:
    24
    Location:
    Annapolis, MD
    Passenger capacity of the Roamer 37

    I calculated 29 people for the roamer (37 feet long, 12 feet wide). Although, I would hate to put 29 people on it (that would hinder performance!!).

    We were at a raft-up this weekend and when a storm blew up, we had 27 huddle in the boat. Many of them were kids (they're small and do not occupy much space).

    Homer - Thanks for the seats and ladder! Excellent additions!!
Page 1 of 2