Click for YF Listing Service Click for Mulder Click for YF Listing Service Click for Abeking Click for Nordhavn

1991 Carver 370 MY Diagrams

Discussion in 'Carver Yacht' started by captnrontx, Mar 21, 2011.

You need to be registered and signed in to view this content.
  1. captnrontx, Mar 21, 2011
    #1
    captnrontx

    captnrontx New Member

    Joined:
    Oct 1, 2010
    Messages:
    46
    Location:
    Lake Texoma
    I need some help, I have a 1991 Carver 370 MY and I am putting Seadek covering in the cockpit area. Does anyone know where I might find a diagram of the cockpit so that I can use to order the covering?
  2. Loren Schweizer, Mar 21, 2011
    #2
    Loren Schweizer

    Loren Schweizer YF Associate Writer

    Joined:
    Apr 20, 2004
    Messages:
    1,352
    Location:
    Coral Gables/Ft. Laud., FL
    1) Go to Home Depot
    2) Buy a roll of their heavy paper (forget what it's called, but it's back by the re-bar & lumber)
    3) Make a pattern w/ paper & tape
    4) Roll it up in a FedEx tube and send it off
    5) Have a beer
  3. NYCAP123, Mar 21, 2011
    #3
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Painter's paper. It comes in a roll, 3' x probably 30'. Probably won't take 20 minute to make a template. What you have left over is great for wrapping packages for mailing.:) I always keep a roll in the house. It always comes in handy.
    Before you mail it out use the paper template to cut a template out of cardboard or other hard stock for trimming the Seadeck.
  4. 805gregg, Mar 31, 2011
    #4
    805gregg

    805gregg New Member

    Joined:
    Jan 6, 2010
    Messages:
    17
    Location:
    Ojai, Ca
    That would be rosin paper, $7 for a 500 sq ft roll.
  5. Capt Bill11, Apr 1, 2011
    #5
    Capt Bill11

    Capt Bill11 Senior Member

    Joined:
    Feb 27, 2006
    Messages:
    1,458
    Location:
    Sarasota/Ft. Lauderdale FL
  6. captnrontx, Apr 4, 2011
    #6
    captnrontx

    captnrontx New Member

    Joined:
    Oct 1, 2010
    Messages:
    46
    Location:
    Lake Texoma
    Yes Seadek sends mylor and this is ok, but tracing and getting it done right is a bit of a pain, not too much, but a pain. I just thought if there was already a blue print on the internet, I would just take advantage of it. But thank you very much for your responses.

    BTW, I am currently installing Seadek on my Carver and I am loving it on my swimplateform and steps. I am now doing the cockpit and helm area. Great product.