Click for Delta Click for Burger Click for Abeking Click for Westport Click for YF Listing Service

Fiberglass sheet railing enclosure ?

Discussion in 'Technical Discussion' started by cleanslate, Dec 10, 2021.

  1. cleanslate, Dec 10, 2021
    #1
    cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,661
    Location:
    Cherry Hill, NJ
    I currently have a sunbrella enclosure around my aft deck from underneath S/S hand rail to just above the deck. I would like to replace it one day with a ridged enclosure like in this photo of a 57’ Hatteras MY. I’ve also seen this thin material (1/8”) on Chris Crafts and others. Where can I get this material? Starboard is to thick for my taste.

    A3E82B5C-7660-4037-ADE1-15F39CCB0521.jpeg
  2. Pascal, Dec 10, 2021
    #2
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,669
    Location:
    Miami, FL
    Sam’s marine in FTL has it.
  3. cleanslate, Dec 10, 2021
    #3
    cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,661
    Location:
    Cherry Hill, NJ
    Great Thanks Pascal !
    Do you know if they cut it? Or how to cut it ? Sizes it comes in ?
    Sorry , about being a P.I.A. With so many questions.
    Thanks.
  4. Capt Ralph, Dec 10, 2021
    #4
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,695
    Location:
    Satsuma, FL
  5. cleanslate, Dec 10, 2021
    #5
    cleanslate

    cleanslate Senior Member

    Joined:
    May 29, 2018
    Messages:
    1,661
    Location:
    Cherry Hill, NJ
    Sheeetttt, CR!
    Fab shops , boat yards in my area , smell and stink. No help.

    But big thanks for the info.
    I will check it out.

    Your Bert has the same stuff I’m looking for , as you know .
    Can I borrow some ?
  6. Capt Ralph, Dec 10, 2021
    #6
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    13,695
    Location:
    Satsuma, FL
    Next fall when I rip the stuff off of the top,, yes.