Click for Burger Click for Furuno Click for Abeking Click for Westport Click for Mulder

Prestige paint pinholes, warranty?

Discussion in 'General Yachting Discussion' started by Lyndsi, Feb 10, 2021.

You need to be registered and signed in to view this content.
  1. Lyndsi, Feb 10, 2021
    #1
    Lyndsi

    Lyndsi New Member

    Joined:
    Nov 28, 2020
    Messages:
    1
    Location:
    Maryland
    We have a 2015 prestige 550 fly we just purchased and just had it painted, during the process they contacted us telling us that thousands of pin holes are showing up in the primer so they had to basically sand it down and fill in all the holes and do a lot of extra work. This to me screams an issue with craftsmanship - the marina attempted to see if the manufacturer would cover it but it doesn’t seem like they are. So I wanted to see if anyone else had any opinions on how to go about this with the manufacturer ... the boat shouldn’t have pin holes at this age in my opinion. It’s costing us an additional 7k in paint repairs. Any thoughts?
  2. olderboater, Feb 10, 2021
    #2
    olderboater

    olderboater Senior Member

    Joined:
    Sep 2, 2013
    Messages:
    7,132
    Location:
    Fort Lauderdale
    Prestige did not extend their warranty until September 1, 2018. Prior to that it was two years.

    Also, specific to issues such as yours:

    These warranties are valid for new boats, starting on the date of handover, and subject to annual care and maintenance of the boat as well as appropriate hull protection conducted by an authorized Jeanneau or Prestige dealer. In order to be approved, each claim will be subject to review by a dealer and technical support services from the shipyard. More details about these warranties are available through our dealership network.

    I can imagine even with the 5 year warranty they might fight the claim, but for your boat, it looks like it just isn't covered.

    https://www.yachtingart.com/2018/09/cruise-with-confidence-aboard-jeanneau-prestige.html
  3. gr8trn, Feb 10, 2021
    #3
    gr8trn

    gr8trn Senior Member

    Joined:
    Dec 3, 2012
    Messages:
    737
    Location:
    OR/CA
    The pinholes are there from manufacturing, not a new thing? I would bet they were there. How did the estimate to paint not account for this before starting the job? Just curious, and as one with experience at finding hidden gems from the manufacturers whilst at a boat yard, welcome to the club. It does require a good relationship with your shipwrights and technicians at said yard.
    I have no doubt your yard is correct and the work needs to be done correctly.
    $7K to sand our paint pinholes on a 550fly seems like a 40-50 hour labor job. Keep in mind this is skilled labor, it's not just some orbital sander and a face mask.
    Sorry you are dealing with this for sure.
    You are out of warranty. If you were in warranty it would be a task to get it covered, seems like an easy warranty call but they have to agree with the diagnosis and treatment plan, that is not as easy to do.
  4. olderboater, Feb 10, 2021
    #4
    olderboater

    olderboater Senior Member

    Joined:
    Sep 2, 2013
    Messages:
    7,132
    Location:
    Fort Lauderdale
    Curious. Were you led by the broker to believe it was still in warranty?
  5. Pascal, Feb 10, 2021
    #5
    Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,147
    Location:
    Miami, FL
    5 to 6 year old boat... not surprised it a not covered by warranty. Why did it need to get painted in the first place.
  6. NYCAP123, Feb 10, 2021
    #6
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Obviously you're stuck on the warranty. Sorry. Are the pinholes in the primer or in the hull? If in the hull I wonder if maybe a case could be made for fraud since it would have been known and then covered up.
  7. motoryachtlover, Feb 10, 2021
    #7
    motoryachtlover

    motoryachtlover Senior Member

    Joined:
    Jan 29, 2007
    Messages:
    651
    Location:
    smithfield, VA
    I am far from a paint expert but have painted miscellaneous things. Pinholes in the applied primer/paint can be indicative of a contaminated surface or poor environmental conditions for application (humidity, temperature, etc). Based on the very limited info I have I am thinking the yard messed up. Maybe an expert will chime in.
  8. Capt J, Feb 10, 2021
    #8
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,434
    Location:
    Fort Lauderdale
    THIS, it's contaminents on the gelcoat OR the air supply for the spray gun. Generally they are caused by oil or silicone and called fish eyes......
  9. NYCAP123, Feb 10, 2021
    #9
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Or IN the gelcoat which could leave someone else paying for it. I'd sand down one section layer by layer till I knew.