Click for Northern Lights Click for Westport Click for YF Listing Service Click for Burger Click for Abeking

MTU 1200V2000M93 Marine Engines - issue or problems

Discussion in 'Engines' started by Brent Lane, Dec 16, 2020.

  1. Brent Lane

    Brent Lane New Member

    Joined:
    Jan 24, 2020
    Messages:
    3
    Location:
    Nashville TN
    I am considering purchasing a 2007 model yr. boat with these engines. Can anyone shed light on their quality, performance, problems, etc.
  2. CaboFly

    CaboFly Active Member

    Joined:
    Aug 24, 2018
    Messages:
    275
    Location:
    Seattle
    What size of boat and type of boat. Both important considerations for M93 series.
  3. Brent Lane

    Brent Lane New Member

    Joined:
    Jan 24, 2020
    Messages:
    3
    Location:
    Nashville TN
    Boat is a 2007 87 ft. X 23.6 ft Johnson motor yacht
  4. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,614
    Location:
    Fort Lauderdale
    They're easy on fuel compared to C32's of that era. However, the 86' Johnson I would think would be hard on motors. It runs very bow high at cruise speed and only does 14-15 knots. In comparison the 105' with 16v2000's 2000 hp was same hull but stretched and got up and ran a solid 20-21 knots at 80% load. That particular boat had a lot of issues with those motors- coolant pump, starters, injectors, injector pump, etc.
  5. Brent Lane

    Brent Lane New Member

    Joined:
    Jan 24, 2020
    Messages:
    3
    Location:
    Nashville TN
    Thanks for the info.
  6. CaboFly

    CaboFly Active Member

    Joined:
    Aug 24, 2018
    Messages:
    275
    Location:
    Seattle
    From what I understand the M93 series was great in displacement hull vessels but had some issues in high load applications of a planning hull. Not familiar with your particular hull but saw some issues in 50 to 60ft Sportfish both 8v and 10v configurations.