Click for Ocean Alexander Click for Nordhavn Click for Delta Click for Cross Click for Burger

New to the Forum

Discussion in 'Luhrs Yacht' started by ScottyJ, May 15, 2020.

You need to be registered and signed in to view this content.
  1. ScottyJ

    ScottyJ New Member

    Joined:
    May 15, 2020
    Messages:
    6
    Location:
    Florida
    1992 350 that I’ve done quite a bit of work to. Glad to be here to absorb and provide any tips I possibly can.

    Attached Files:

  2. Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    Welcome Captain. We look forward to hearing from you.
  3. YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,353
    Location:
    South Florida
    Welcome to YF, Scotty. Your pic has been reduced to 800 pixels to better 'fit' our format.
  4. ScottyJ

    ScottyJ New Member

    Joined:
    May 15, 2020
    Messages:
    6
    Location:
    Florida
    Thank You!!
  5. ScottyJ

    ScottyJ New Member

    Joined:
    May 15, 2020
    Messages:
    6
    Location:
    Florida
    Thank You!!
  6. CaptainChase

    CaptainChase Member

    Joined:
    Dec 20, 2012
    Messages:
    36
    Location:
    Seabrook, TX
    Welcome! Boat looks awesome!! We have our 40’ open out of the water now doing tons of work. Excited to get her back in the water and fish it a bit before interior details begin. Will see about posting some pictures on here for the first time here shortly.
  7. ScottyJ

    ScottyJ New Member

    Joined:
    May 15, 2020
    Messages:
    6
    Location:
    Florida
    I’m going to the yard this month for a bottom job. Did a whole refit of the interior cabin of ours, very little left of the original interior other than the Luhrs panel.

    B55D12F5-8C4C-4CC3-A97E-A099E3AEEF3B.jpeg
    Last edited by a moderator: May 15, 2020
  8. Josh Keeran

    Josh Keeran Member

    Joined:
    Feb 10, 2020
    Messages:
    62
    Location:
    Chicago/Racine,WI
    Looks great! What materials did you use fir the interior? I’m working on my floor now. Next down the road will be the paneling
  9. ScottyJ

    ScottyJ New Member

    Joined:
    May 15, 2020
    Messages:
    6
    Location:
    Florida
    GM Josh,
    I used Teak and Holly Ply on the galley floor. the salon is one piece of carpet now over all the hatches instead of wrapping each panel.
    We used Teak a need to do all the walls and unvarnished it all with a Satin Finish.
  10. Marc Anderson

    Marc Anderson New Member

    Joined:
    May 26, 2020
    Messages:
    6
    Location:
    Maryland
    Very nice.
  11. ScottyJ

    ScottyJ New Member

    Joined:
    May 15, 2020
    Messages:
    6
    Location:
    Florida
    Thanks Capt.