Click for YF Listing Service Click for Perko Click for Furuno Click for Mag Bay Click for Comfort

Biggest tender on hydraulic swim platform?

Discussion in 'General Yachting Discussion' started by German Yachting, Jun 7, 2019.

You need to be registered and signed in to view this content.
  1. German Yachting

    German Yachting Senior Member

    Joined:
    Jul 26, 2010
    Messages:
    1,943
    Location:
    West Coast
    I see that this Horizon RP110 that was just launched features a 10’10” hydraulic carbon fiber swim platform which is impressive of itself but she packs that with a Scout 255 lxf. I don’t think I’ve ever seen a larger tender being carried that way. Even a lot of 50m mega yachts don’t seem to go that big and usually not going for an actual center console. Are there any other builds that I’m missing?

    Overall, this sounds like a great setup. The owners get a large tender to use, the crew don’t need to mess around with towing it, the insurance companies are happier, and just overall easier handling at the dock and all around. I’d imagine the downside would be the maintenance. I’m sure that there would be some long term concern with the hydraulics given the weight hanging off at the edge of the boat. This just seems to be an interesting setup and I can’t think of another 110’ yacht that sports such a large tender.

    http://www.horizonyachtusa.com/article.cfm?a=320
  2. YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,353
    Location:
    South Florida
    Biggest tender-to-yacht ratio I've seen.
  3. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    Do you see the platform dipping down?
  4. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,120
    Location:
    Miami, FL
    That’s a lot of weight at the stern. I wonder what the cruise speed and fuel burn is. Hopefully Horizon adjusted the balance of the boat.

    I don’t think hydraulics are a concern unlike the leverage on the transom
  5. German Yachting

    German Yachting Senior Member

    Joined:
    Jul 26, 2010
    Messages:
    1,943
    Location:
    West Coast
    Could this boat even get onto a plane now? I feel that platform would create a huge amount of drag.
  6. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    Something I always wondered about; Could it be possible to ad a hull section under a stage/platform like this?
    Offering the whole ship added planning and flotation? Near like adding a cockpit extension but the whole stage and hull section is pushed down.
    Extra bonus; beam to length ratio gets better.
  7. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,120
    Location:
    Miami, FL
    Platforms are usually fairly high and don’t add drag in the water but they sure affect the balance of the boat with all that weight... some boats require big trim tabs to get up on plane
  8. RER

    RER Senior Member

    Joined:
    Jan 20, 2009
    Messages:
    1,532
    Location:
    Newport Beach CA
    Am I mistaken or is that shot with the CC a concept CGI? I saw a video of this boat on sea trials and there is nothing on the platform. As far as getting on plane I think Horizon calls this series a semi displacement hull so I don't think it's going to get on plane anyway.
    Last edited: Jun 7, 2019
  9. German Yachting

    German Yachting Senior Member

    Joined:
    Jul 26, 2010
    Messages:
    1,943
    Location:
    West Coast
    That’s the real deal. The sea trials just didn’t have the tender onboard.
  10. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    My biggest concern would be the trim change of using the yacht with the cc, and using it without. Horizons generally are not great performers for their length, HP, speed (and fuel burn).

    Can’t put hull under the platform because then the platform can’t go down.
  11. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    Re read it.

    the whole stage and hull section is pushed down.

    For the speed readers; In one piece is what I meant.
  12. Danvilletim

    Danvilletim Senior Member

    Joined:
    Oct 30, 2011
    Messages:
    794
    Location:
    isleton, ca
    I think it looks like crap. Too many times it will be docked with the tender n and in. My opinion take away from a great place to hang out. But to each their own.
  13. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Too much force would be on it when running and cause it to vibrate itself to death. Also too much buoyancy to put it down for hydraulic rams.
  14. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    No imagination.