Click for Mulder Click for Walker Click for Delta Click for Furuno Click for Abeking

2006 Eskimo Ei600 Icemaker Repair

Discussion in 'Technical Discussion' started by CSkipR, Oct 3, 2018.

You need to be registered and signed in to view this content.
  1. CSkipR, Oct 3, 2018
    #1
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    My Eskimo icemaker has quit working. I'm positive the auger 230v electric motor is bad and possibly the evaporator auger bearings, etc. It quit on me this year in the Bahamas. Checked with Dometic and they don't stock or make all the parts for these older units anymore. He said the motor is about $1250. The refrigeration side is fine. Anyone have a person they recommend that can repair this unit.
    Thanks, Skip
  2. Capt Ralph, Oct 3, 2018
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,727
    Location:
    Satsuma, FL
    Call Tally's marine. Only shop near your hood I trust
    Tell Keven I sent you.
  3. CSkipR, Oct 11, 2018
    #3
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Still looking for other companies that may rebuild these units. They don't have to be in FL will ship if necessary.
  4. Capt Ralph, Oct 11, 2018
    #4
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,727
    Location:
    Satsuma, FL
    Next comment; 12 year old unit IS past EOL.
  5. CSkipR, Oct 12, 2018
    #5
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Still looking for other companies that may rebuild these units. They don't have to be in FL will ship if necessary.
    Maybe, but I found Martins Marine in Wilmington NC that says he has all parts for these units and rebuilds them regularly. It would seem if you pay over 11k in 2006 the unit should still be repairable 12 yrs later. My ac units are still running strong.
  6. CSkipR, Dec 18, 2018
    #6
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    A friend recommended Neville Edwards Refrigeration in Stuart that builds there own icemakers. Neville worked for Eskimo at one point before they were acquired by Dometic. His units weigh about 1/2 what mine weighs at 140lbs and produce the same amount of ice. What was great he was able to repair my E1600 unit with parts he had around the shop. Highly recommend if you need some refrigeration help in your vessel.
  7. captholli, Dec 18, 2018
    #7
    captholli

    captholli Senior Member

    Joined:
    Jan 4, 2010
    Messages:
    1,164
    Location:
    In The Bilge
    +1
    Neville has been in the cold air / frozen water business for along time along with his brother Angus. First used his services in St. Thomas USVI in the '80's where Neville and his brother Angus had a shop . These two have forgotten more than most know about the marine business. Angus opened a refit shipyard in Bayou La Batre, AL. Angus Yachts.