Click for Nordhavn Click for YF Listing Service Click for Northern Lights Click for Furuno Click for Abeking

Consolidated Marine Corp: Avenger

Discussion in 'Vintage & Classic Yachts' started by Richmond, Sep 20, 2004.

  1. Richmond

    Richmond New Member

    Joined:
    Sep 20, 2004
    Messages:
    2
    Location:
    St.Peter's, Nova Scotia, Canada
    This is my first post and I am seeking information. I am inquiring information on a
    yacht called the Avenger that was manufactured by Consolidated Marine Corperation in 1966. It is 39 feet long and there were approximately 50 produced. It was built to compete with the Hatteras. I can't seem to find any information on this company, maybe the name changed throughout the years. If someone has any helpful information on this yacht and/or compamy, I would greatly appreciate it.

    Thanks

    Attached Files:

    Last edited: Oct 11, 2004
  2. Richmond

    Richmond New Member

    Joined:
    Sep 20, 2004
    Messages:
    2
    Location:
    St.Peter's, Nova Scotia, Canada
    Any Ideas ?????
  3. YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,353
    Location:
    South Florida
    Richmond,

    Back in the mid 70's, I vaguely remember the Consolidated name, but I knew nothing about them. For some reason, my bad memory tells me they were affiliated with North American, which produced a popular and well built line of 20 something feet, fish-type cruisers. They basically looked like little Bertrams without flybridges.

    Wish I could offer more insight... :(
  4. tyree leonard

    tyree leonard New Member

    Joined:
    Jun 22, 2005
    Messages:
    1
    Location:
    california
    I am a current owner of a 1969 Avenger. She has twin Rebuilt Chrysler 440's and all new exaust manifolds, elbos, and risers. I've just completed a major $20,000 refit and wish I had more $$ to give her the diesels she deserves. This is a seriously overly well built boat. Heavy matted-woven Fiberglass Hull. Capable of Speeds of up to 33 MPH and built by Jim Wynne and Walt Walters according to a published article I have from Motor Boating/January 1968 which you can also purchase from ebay. I am also in the process of trying to learn more about her. The Rumors that I've hurd however are that yes they were in competition with Hatteras, and when Avenger went out of Business they sold the Molds to Hatteras and that is what Hatteras is based on today. (this could be total bs, but I would very much like to find out if their is any truth to it). I am so lucky to own this boat. It is so affortable for the space and luxury that it affords it's almost laughable as compared to current selling Vessels of this type and size in todays market place. If, their were really only 50 built, then I am truly lucky to own one. I know of one other that is lying in my Harbor here in Ventura. One that took for ever to sell in Wisconsin, one that sold in the Sacremento Delta, a 1972 flybridge currently for sale in Michigan, and one that is currently listed for 100k on the gulf in Texas. So, in the last 2 years of ownership, this is what has come up for sale. This is an exstremly rare boat to have. The picture of the one listed here is new to me so that makes a total of 7 that I know of left in the World. It would be fantastic if all the Avenger Owners could figure out a way to start a forum much like catalina yacht owner's have. Just a suggestion for any further readers that find this link. You may however want to rename the link so it can be found just as Avenger Yacht, Avenger Boat. This Vessel Apraises at over $80,000 and usualy sells for around $70,000 - $75,000. Mine, is the only one I know of with a queen pullman berth in the aft cabin. The headroom and space on this boat is truly fantastic. 6'5" headroom through out except in kitchen over 12'. Beam is stated as 13'10" length is 39'10" and draft is 42". I am not so certain that these measurments are 100% since my beam seems to measure out around 13"4. I have many photos lying in and out of the water if you care to have any feel free to contact me.
  5. ohioron

    ohioron New Member

    Joined:
    Jul 25, 2011
    Messages:
    1
    Location:
    Sarasota, FL
    avenger Location

    There is another 1968 Avenger 39' near Rochester, NY. If you wish I can forward the email address to you
    Ohioron
  6. '69Avenger

    '69Avenger New Member

    Joined:
    Dec 5, 2011
    Messages:
    1
    Location:
    Pittsburgh, PA
    We have a 1969 39' Avenger in Pittsburgh, PA on the Ohio River. It is in need of work and would make a great project for someone. Is any one interested?
  7. butzko

    butzko New Member

    Joined:
    Jul 9, 2013
    Messages:
    2
    Location:
    Gig Harbor, WA
    Avenger

    I too am looking for information on the Avenger. I have a 66 and am looking for the specs for the hardtop. I have canvas and really need the hardtop out here in the Pacific Northwest. Any info appreciated.
  8. SeaEric

    SeaEric YF Historian

    Joined:
    Jan 28, 2007
    Messages:
    1,360
    Location:
    out on the dock
    Here are a few photos of a 39 Avenger 1968 that we recently sold. The hardtop IMO looks to be non-original.

    Attached Files:

  9. lbsea

    lbsea New Member

    Joined:
    Jun 13, 2014
    Messages:
    1
    Location:
    ct river
    Here's another one! portland ct

    We are new owners of this old classic. Unbelievable original condition inside. Not to catch up and restore some sun damage to the old girls exterior. Located in portland ct

    IMAG0809.jpg
    Last edited by a moderator: Sep 24, 2017
  10. JENSY

    JENSY New Member

    Joined:
    Aug 8, 2017
    Messages:
    4
    Location:
    florida
    HI, I have a 1968 Avenger 39 I bought about 7 months ago. Are there any Avenger 39 owner clubs?
  11. 39 er

    39 er New Member

    Joined:
    Aug 30, 2017
    Messages:
    2
    Location:
    Upstate New York
    We also recently purchased a 68 avenger with twin 440 Chrysler Marine engines. The hour meter says 2600, and the mileage claims 10000, but I doubt either are very accurate. Very few seem to know of the boat, but we have been enjoying it as a family and it seems to be very sturdy, even with large crowds on the back deck. Looking forward to hearing more. Our next plan is to replace the rotting swim platform. I would like to raise the platform a foot higher at 3 and 1/2 foot. Not sure if I should do wood or fiberglass. My experience with either one is somewhat limited. Any suggestions would be welcome.
  12. JENSY

    JENSY New Member

    Joined:
    Aug 8, 2017
    Messages:
    4
    Location:
    florida
    Hi 39er,
    Glad to hear from another Avenger owner. I am hoping to see if we could get some pics as I have some Ideas for mine. I am planning on painting mine in November with non traditional Avenger colors.

    IMG_1383.JPG IMG_1385.JPG IMG_1384.JPG
    Last edited by a moderator: Sep 24, 2017
  13. Ted Anderson

    Ted Anderson New Member

    Joined:
    Sep 23, 2017
    Messages:
    13
    Location:
    Putnam valley n.y
    I have a1969 Avenger ..starting a rebuildwould like info.anybody help out.
  14. JENSY

    JENSY New Member

    Joined:
    Aug 8, 2017
    Messages:
    4
    Location:
    florida
    What do you need?
  15. Ted Anderson

    Ted Anderson New Member

    Joined:
    Sep 23, 2017
    Messages:
    13
    Location:
    Putnam valley n.y
    Hi,I want to rewire and plumb and try to bring to new condition but 1969 look and feel.I can't find any picture of how it looked new.mine is untouched for the most part.stairs are not from my boat for sure.kitchen is off some how.can't figure it out because I don't know what it looked like.stuff like that.I'm the 3rd owner.2nd never drove it or did anything but cheap dock side up keep.lol thank you for replying..I'm not good at this so it took me a bit to see your reply.thanks again
    Ted
  16. JENSY

    JENSY New Member

    Joined:
    Aug 8, 2017
    Messages:
    4
    Location:
    florida
    Mine has the original layout except the stove/range and fridge swapped positions as it made more sense.

    Attached Files:

  17. Ted Anderson

    Ted Anderson New Member

    Joined:
    Sep 23, 2017
    Messages:
    13
    Location:
    Putnam valley n.y
    I sent to wrong place.my response...long text to.so I have to do again.lol so here we go again...plumbing it is easy now just replumb.heads will be same but take care with vents loops sags and the like.not important to be original can't sail that way right.get in trouble.lol rewiring as well not important original.my boat has the bunk beds and head..I guess I have the original couch and after seeing that picture I think I through out chairs.ugly.what an ass.lolthank you for getting back to me.my boat is a1969 full top I guess..love my boat....moving on it as soon as I can..son is in collage now so I can do what I've always wanted too..17 yrs I've been paying and waiting...I redid most of the stairs.I think I can buy on ebay a magazine about my our style boat.I can't learn or get enough.I just learned from what you sent me they came with diesels.didnt know that.love to switch her to that.thank you..I'm at work and I can't talk but wanted to thank you.for your time its funny boat people you meet people that will help you straight up and then there are lot helping themselves...lol thank you for helping me on my hole in the water.lol love my boat.thanks again
  18. Ted Anderson

    Ted Anderson New Member

    Joined:
    Sep 23, 2017
    Messages:
    13
    Location:
    Putnam valley n.y
    Still have your39?just found this and very car e ful to check when things are posted.lol so its been awhile.starting to put my69 avenger together now
  19. 39 er

    39 er New Member

    Joined:
    Aug 30, 2017
    Messages:
    2
    Location:
    Upstate New York
    Our tile ceiling was removed in the back bedroom and we are debating on what to use to cover the roven woving.Our setee was removed before we bought the boat, but we replaced it with a straight six foot counter top and three cabinets underneath. There is a some open space for the dog's food and water and a flip top garbage can. The extra counter space is nice for the microwave and setting food out. We have not missed it, but we never had it. There are usually too many on board to fit around the setee anyway. Our boat came with a fairly updated vacuflush system that works well. Onan generator. One of our 440s seems to have a little bit of blow by. I think it might be a sticky valve, but I am not sure. We will be hauling out soon for winter. Pictures will be posted. Nice to hear we are not alone
  20. Ted Anderson

    Ted Anderson New Member

    Joined:
    Sep 23, 2017
    Messages:
    13
    Location:
    Putnam valley n.y
    I had mine for17 y r s.my son is in collage now and I want to live on mine.its in tact for most part.3rd owner.first one short time.2nd 30yrs.never touch it just up keep.I'm3rd and17 yrs later I'm ready.I've been saving parts over the yrs.salvaged things as well and now its my time lol my son is out house for most part.. or stay on boat if you like.but my time.sanded it and ready to paint outside.inside I have all new stuff.I've been waiting...to install when I figure out how to insert a photo I will.thanks for getting back.love my boat!!