Click for Mulder Click for Nordhavn Click for YF Listing Service Click for Delta Click for Northern Lights

Ocean trawlers

Discussion in 'General Yachting Discussion' started by Kevin K, May 23, 2017.

You need to be registered and signed in to view this content.
  1. Kevin K

    Kevin K New Member

    Joined:
    May 11, 2017
    Messages:
    6
    Location:
    Chicago
    Doing some research on the better trawlers Norhavn 63, Bering 65 and fpb 64. Cost seem similar. Without given my slant and opinions on looks, comfort and performance does anyone have opinions they can share. Indeed my wife and I differ so outside opinions would help.

    Thanks kevin
  2. JWY

    JWY Senior Member

    Joined:
    Feb 22, 2004
    Messages:
    1,507
    Location:
    Ft. Lauderdale
    There are some significant differences between the 3 long-range cruisers you mention. Make sure you know the pros and cons of fiberglass, aluminum, and steel and set your preference level accordingly. Big differences in liveability as to layout, interior volume, and space usage. All 3 of these ride and handle differently. If you are considering a new build, be sure to get a comprehensive price list on what is included and what options might not be so optional.

    Judy
  3. PacBlue

    PacBlue Senior Member

    Joined:
    Jan 9, 2009
    Messages:
    1,988
    Location:
    Dana Point, Ca
    If I was in the market for an ocean going trawler and could live with a less than 'yachty' interior but had to have a rugged steel vessel, I would like to give these guys a try: https://www.fredwahlmarine.com/fishing-vessels

    Kind of like when Bruce Kessler had Delta convert their fishing trawler to his tastes for the farmhouse trawler Zopilote., and the trend was set.
  4. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    I remember her. Landed on an offshore pinnacle. Her motor fell out, thru the hole in the hull. But the boat was still salvaged.
    Then, Spirit of Zopilote.
    Never heard any thing on either again.
  5. Kevin K

    Kevin K New Member

    Joined:
    May 11, 2017
    Messages:
    6
    Location:
    Chicago
    Thanks I believe I will be looking more at the Norhavns this summer. The FPB's are rare and sort of military looking which the wife can't get past even though they look to handle exceptionally well. There are more than a few Norhavns on the market so I can take a little time on this. I looked at a 60 in Fort Lauderdale and I don't like the fly bridge, it seems nothing but a wind catcher.
  6. Kevin K

    Kevin K New Member

    Joined:
    May 11, 2017
    Messages:
    6
    Location:
    Chicago

    Those are more commercial than I'm looking at but appreciate the post.
  7. d_meister

    d_meister Senior Member

    Joined:
    Mar 4, 2010
    Messages:
    468
    Location:
    La Conner, WA.
    I would go with a vessel that stays upright if the propulsion or stabilizers are lost.
  8. Kevin K

    Kevin K New Member

    Joined:
    May 11, 2017
    Messages:
    6
    Location:
    Chicago
    Do you have opinions of such crafts.
  9. PacBlue

    PacBlue Senior Member

    Joined:
    Jan 9, 2009
    Messages:
    1,988
    Location:
    Dana Point, Ca
    This event would be the reason I now favor steel over frp or aluminum for remote destination travel.

    Another one I have come to admire from afar: http://www.realtrawlers.com/index.php?option=com_content&view=article&id=32&Itemid=81

    The added bonus - you can make your deliver trip from New Zealand to destination of choice!
  10. d_meister

    d_meister Senior Member

    Joined:
    Mar 4, 2010
    Messages:
    468
    Location:
    La Conner, WA.
    Well, I do, but out of deference to this site's advertisers, I won't check that can for worm content. Some models of long range trawlers by maker are less exciting in following or beam seas than others, so it's not fair to tar with a broad brush. I would suggest to your wife that maybe a little lipstick on the fpb 64 might help :) Or, like so many people appear to do with cars; focus on the inside where you will spend your time.
    Otherwise, I have had good experiences with steel vessels, as PacBlue suggests. With a good portable welder aboard, you can effect a 100% effective repair instead of a good sturdy temporary repair. Aluminum is a little more problematical with the requirement of inert gases.
  11. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    What kind of cruising are you going to do with the yacht? What locations??
  12. Kevin K

    Kevin K New Member

    Joined:
    May 11, 2017
    Messages:
    6
    Location:
    Chicago
    I just followed the Hamilton's as they left Rhode Island 3 weeks ago in their Norhavn 52 and crossed the Atlantic to Kinsale Ireland. 2800 nm and 17 days avg 7 knots. They ran into a couple of lows and dealt with significant wind and waves but for the most part they were happy with the trip. Their 52 is 10+ years old with 9000 hrs and has crossed the Pacific, Indian, south Atlantic and now this so it would lead to confidence in the brand. They had their first mechanical issue during the crossing but had the spare parts to take care of it so shows their good maintenance has served them well. This sounds like a blast even though I believe they took a chance and left a bit early in the season to be that far north.
  13. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    So seeing blue water on all 4 sides with nothing to see for days on end and getting bounced around is a blast?
  14. maldwin

    maldwin Senior Member

    Joined:
    Sep 20, 2009
    Messages:
    332
    Location:
    Dark Harbor Me/ Hobe Sound Fl
    I love the nothing but blue aspect,although I am not as keen on the bouncing around part. Modern forecasting, and a very flexible schedule can smooth out most bumps. I often get a bit anxious to see land after a few days at sea, but can't wait to go back out after a few days ashore.
    On the topic, I am very happy with my Nordhavn 43 FB,and I never thought I would be happy with a new fiberglass production boat. I have always preferred Wood classics, but this boat is making me appreciate both.
    Best,
    Maldwin
  15. Kevin K

    Kevin K New Member

    Joined:
    May 11, 2017
    Messages:
    6
    Location:
    Chicago
  16. GhostriderIII

    GhostriderIII Senior Member

    Joined:
    May 8, 2015
    Messages:
    351
    Location:
    Newfoundland
    Bering built a few ships for others and they do a great job. Never liked fibreglas that much with all the containers floating around in the sea lanes. I like Diesel Ducks too. Not very pretty like a Nordhavn, but it'll get you where you want to go without wasting a lot of fuel. Get one with a sailing rig to save even more fuel.