Click for Northern Lights Click for Cross Click for Nordhavn Click for Westport Click for Mulder

Great Loop Cruise Video

Discussion in 'General Yachting Discussion' started by NYCAP123, Aug 1, 2013.

You need to be registered and signed in to view this content.
  1. Ken Bracewell

    Ken Bracewell Senior Member

    Joined:
    Feb 9, 2006
    Messages:
    1,721
    Location:
    Somewhere Sunny
    5' would be no problem, but I can't imagine taking a 103' there. You're more likely to experience weed fouling before running aground!

    I took the RENA to Sarnia Bay a couple of years ago, and moored at the City Park. They don't offer transient dockage, but I have a couple of connections in town :D
  2. olderboater

    olderboater Senior Member

    Joined:
    Sep 2, 2013
    Messages:
    7,132
    Location:
    Fort Lauderdale
    Amazing how many places I've docked that can't take a boat the size I was on that day. Often they can fit one in if you're real nice and we have docked at a City Civic Center that didn't allow overnight either, but with full permission. Often it's just situational. But the shallow and weeds are another thing. Actually the boat we will do the loop in a couple of years does only have a 5' draft. I'm guessing Nycap is 5' or even less. Once you cross 5' your issues on the loop start to increase although not so much in the Great Lakes as the other sections.
  3. Old Phart

    Old Phart Senior Member

    Joined:
    Mar 14, 2011
    Messages:
    1,332
    Location:
    I dunno
    A little reading to stir the cobwebs.

    http://www.yachtforums.com/forums/g...48-great-loop-cruise-video-13.html#post190428
  4. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    If you do the Great Loop and follow the route during the normal time, the water level is usually much higher than posted. For example if you're in the Erie Canal May,June, and even into July the water level is much higher due to the snow melt off not draining out yet so depth is not usually an issue if your even 6'. I had no depth issues on a 75' Hatteras when I did it (nor a 64' Viking SC, or 58' Searay). Although we did have a lot of issues on the 75' with either marina's not having a slip large enough, or not enough electric at the slip 2-50 amps available.
  5. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Correct on all. Just got a notice of lock closures today on the Erie due to high water.
  6. olderboater

    olderboater Senior Member

    Joined:
    Sep 2, 2013
    Messages:
    7,132
    Location:
    Fort Lauderdale
    Your notice must have been delayed because reopened now. There were also some roads closed for a bit. All of the NY waterways are now open except the Syracuse Inner Harbor.
  7. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    It was a day or two ago due to that storm that hit us in Cleveland.

    We're in at Sarnia. Nice. Met Ken ' s dad also nice. He's a waiting the caterers for a run tonight. Don't think I've seen a white shirt and boards since I left Lauderdale (only kidding. I've run a few dinner boats up north):D. Nice view off the bow cam. Probably making Ken homesick.
  8. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Sarnia Bay

    Sarnia Bay a small, shallow bay with more than a few geese. I'd call it more of a cove than a bay, at least where the marina is. This morning I came on deck at 0620 to find that the geese had been replaced by bass boats. Guess because I'm a coastal cruiser I'd just never seen such a sight. The bay was packed. I stopped trying to count at 50, and there were more being launched at the ramp by the minute. Not sure if there was a tournament or they're waiting for the fuel dock to open or if this was an every Sunday thing. They weren't fishing, just hanging out. Looked out again at 0700 they were gone.
  9. Old Phart

    Old Phart Senior Member

    Joined:
    Mar 14, 2011
    Messages:
    1,332
    Location:
    I dunno

    So, did you wet a line? :D

    https://www.facebook.com/TbbaTriBayBassAssociation
  10. olderboater

    olderboater Senior Member

    Joined:
    Sep 2, 2013
    Messages:
    7,132
    Location:
    Fort Lauderdale
    They were waiting for the start of the tournament. Having lived on a lake, we were quite familiar with these. Typical lake starts were 100 high speed bass boats taking off at the starting signal in a mad race to the best spots. Most bass boats around us were capable of at least 60 mph.
  11. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Heck, my friends 20' Ranger did 94mph on the motor and then he had another 150hp of Nitrous on top of that. I think he got it up to 107mph with the nitrous on gps and let off of it.
  12. SomeTexan

    SomeTexan Member

    Joined:
    Jun 20, 2013
    Messages:
    190
    Location:
    Texas, landlocked for a bit longer...
    What model Ranger? I'm not familiar with any of their hulls that will handle that much speed. Although I know a few old tourney fishermen that had Allison boats painted to look like Rangers, Skeeters, Nitros and the like. Keep their sponsors happy, and be first to the hole.
  13. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    It was an old one......mid 1980's I believe. He put a 250 Ocean Pro he built on it with a lot of work done pushing over 325hp on motor. It did 94mph on motor. I was on it for that, it started to chine walk and get a little squirelly at around 75 mph. He had a hydraulic jackplate on it and 4 blade prop. I was never on it with the nitrous, he kept the other fuel tank with race fuel and some weird oil, I think castor bean in it and switched it over to that tank for the nitrous excursions.
  14. SomeTexan

    SomeTexan Member

    Joined:
    Jun 20, 2013
    Messages:
    190
    Location:
    Texas, landlocked for a bit longer...
    Yea, you mix castor oil with the fuel to spray a 2-stroke. Otherwise they tend to seize when you come off the nitrous. With that much, you could make a Ranger move pretty good. I am surprised a 4 blade prop hit that speed, 3 or 2 blades seem to be the norm for much over the 80mph mark. At least on single engine, smaller boats. Although I spent more time playing with hydro's, I've owned and run a couple Allisons over the years. Anyone that tops 100 on a sub 22' shallow v has my respect, they can be a handful.
  15. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    He had a giant 3 blade clever 32" pitch I think he spun close to 7,000 rpms, but you could hardly get the boat up on plane with it. So he went to a 4 blade and it ran almost as good top end and only lost a few mph supposedly. But was a lot better performing for bass fishing and cruising around.
  16. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Grand Bend, On.

    G.B. is a good stop. The dock staff is extremely helpful and accommodating, and the marina can handle a boat our size. Getting in is very easy. It's also nice to see the streets loaded with bikinis. Felt like So. Florida.:D It's also a great stop for a few days if you have kids. For me personally though it's the kind of place that one afternoon is enough, very touristy. So we'll be moving up the Huron coast today with a plan to stop next at Port Elgin.

    P.S. Local knowledge from some people back in Sarnia was invaluable. Never underestimate local knowledge,but of course choose your sources wisely. We had been planning to make it up the coast to Georgian Bay in 2 days, but the midway stop could have gotten us into trouble from what I heard. So far the advice has proved to be good.
  17. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    I stopped in Rodgers City and it was deep and easy to get into and the marina was large. Nothing going on there, but if all you're looking for is a safe stop, it's a good choice. It's halfway between Saginaw Bay and Macinaw
  18. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Won't see Rodgers City unless/until at least next spring. We're keeping our Canadian flag raised through this leg and most of next. We're following the Bruce Peninsular. Tonight Port Elgin, tomorrow Tobermory, then into Georgian Bay where we'll lay up until the next leg.

    BTW, for those watching the bow cam, it's just water and more water for awhile. We'll be starting to come in to Port Elgin just before 1500. So go to work.:D
  19. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Gotcha......I've never done the Canadian side over there. However, every Canadian city I've been to has been very nice and clean.
  20. AdamDavis

    AdamDavis New Member

    Joined:
    Aug 23, 2014
    Messages:
    1
    Location:
    Belle River
    Grand Bend

    I'm glad Grand Bend worked out for you... It was great to meet you.. Enjoy your trip..

    Adam / Blue Moon