Click for YF Listing Service Click for Mulder Click for Westport Click for Cross Click for Perko

Pedestal seats on the bridge

Discussion in 'Chris Craft Roamer Yacht' started by watjam, Jan 21, 2010.

  1. watjam

    watjam New Member

    Joined:
    Feb 2, 2006
    Messages:
    68
    Location:
    We hail from Huron, Oh.
    My wife is a sweet-heart, she got me two brand new Todd's for Christmas for up on the bridge. But I'm the poor bastar* that has to install them!
    Who out there among you has performed this task? I'm wondering if I have to drop the headliner or not. Also, have not purchased the pedestals yet.

    Regards,:eek: watjam
  2. PropBet

    PropBet Senior Member

    Joined:
    Apr 21, 2007
    Messages:
    1,216
    Location:
    Is Everything!
    Talk to Henning. I'm sure he's done dozens of them.
  3. Carver370

    Carver370 New Member

    Joined:
    Jul 22, 2008
    Messages:
    34
    Location:
    New Buffalo Michigan
    Now THAT is comedy at its best right there!
  4. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    If you're going into glass I'd install a backing plate which would in fact involve removing the headliner. Here's an article on it:
    http://www.captainariel.com/pdf/boatmanship/boatmanship_200712_take_your_sit.pdf
  5. Pascal

    Pascal Senior Member

    Joined:
    Feb 29, 2008
    Messages:
    8,120
    Location:
    Miami, FL
    You could get aWay with toggle bolts but a backing plate would be best, depends on how thick the deck is

    also if the deck is balsa cored you should drill some core out around the holes and fill with epoxy, don't rely on sealant or you ll be replacing some core in a few years
  6. watjam

    watjam New Member

    Joined:
    Feb 2, 2006
    Messages:
    68
    Location:
    We hail from Huron, Oh.
    Good artical NYCAP. I don't know why messing w/ the headliner scares me
    so much - but it does. One good thing about dropping the liner is, it enables me to get some sound proofing material up there.
  7. NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Growing up I was always afraid to pull things apart unless I knew for sure how to put it back together. Still am to a point. Meanwhile my brother would pull anything apart and he never could put anything back together. More stuff to blame our parents for.:D Pull the liner. It's not a big deal to put back.
  8. watjam

    watjam New Member

    Joined:
    Feb 2, 2006
    Messages:
    68
    Location:
    We hail from Huron, Oh.
    Pedestal seats

    Did it! Only took me a year to work up the courage.

    Upon further inspection, the head-liner was getting rather worn and no longer could be cleaned respectably. I ended up pulling it all down and re-doing the whole thing. It looks very nice.

    The Todd's are a nice addition and free up some space up there. I used a plywood backer bedded with epoxy filler.

    Took advantage of the moment to run some wires for a chart light above the helm, and some speaker wires to the rear of the sedan top.
  9. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    I would've used a 1/4" Aluminum plate with 5200 on it as a backing plate. Plywood will work for a little while, but it's quite likely the washers and nuts will compress it and work their way through it.
  10. Kafue

    Kafue Senior Member

    Joined:
    Nov 29, 2006
    Messages:
    1,164
    Location:
    Gold Coast Australia
    While you had the chance, should have installed a few "channels" to each corner of the saloon for any future wiring or other needs. Something I often do in the ceilings of rooms where my clients have a TV/movie room or games room but they can't decide at the time when we are completing the project.