Click for Mulder Click for Burger Click for JetForums Click for YF Listing Service Click for Glendinning

Donzi Sportfish Z-65 - "Miss Judie"

Discussion in 'Donzi/Roscioli Yacht' started by fish, Jan 4, 2004.

You need to be registered and signed in to view this content.
  1. fish

    fish New Member

    Joined:
    Dec 16, 2003
    Messages:
    43
    Location:
    St. Pete Bch, FL
    This is Hull #1, Miss Judie, Donzi 65' Tournament Sportfish.

    Attached Files:

    Last edited: Jan 4, 2004
  2. fish

    fish New Member

    Joined:
    Dec 16, 2003
    Messages:
    43
    Location:
    St. Pete Bch, FL
    another...

    Miss Judie again

    Attached Files:

  3. fish

    fish New Member

    Joined:
    Dec 16, 2003
    Messages:
    43
    Location:
    St. Pete Bch, FL
    from original brochure

    profile

    Attached Files:

  4. fish

    fish New Member

    Joined:
    Dec 16, 2003
    Messages:
    43
    Location:
    St. Pete Bch, FL
    from original brochure

    layout

    Attached Files:

  5. YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,353
    Location:
    South Florida
    Hi Fish!

    I'm honored to have the Donzi 65' Hull #1 on the site! :) It looks brand new!

    Many boaters are unaware that Donzi built the 65'. Is it built in the same facility as the remainder of the Donzi sport boat/center console line? Can you elaborate on your experience owning the boat? What additions or changes would you make?

    Looking for forward to your input and thanks again for sharing pictures of your Donzi!

    Carl
  6. fish

    fish New Member

    Joined:
    Dec 16, 2003
    Messages:
    43
    Location:
    St. Pete Bch, FL
    Donzi 65

    The 65 is no longer built by Donzi marine ( http://donzimarine.com/ ), However, retains the name through license agreement. The current Builder, fortunately, is Bob Roscioli http://www.donziyachts.com/

    The 65' was the brain child of Jack Staples,an avid fisherman, and at the time was the owner of Donzi Marine. The yacht was designed by Don Westerman, who has had his protractor on almost every line of boats in the country, and was the designer of the smaller Donzi Z series as well ans the center consoles during the mid-late 80's.

    When Staples and his partner Dick Genth sold their stock in Donzi to OMC, Bob Roscioli acquired the right, tooling, and license to use the DOnzi name to build the 65'. The Donzi Yachts are currently built in Ft. Lauderdale, Fl, in Roscioli's yard. Not only has he managed to maintain the quality of the donzi name, but IMHO, he has taken it to another level (better). They currently build (i think) the 65, 72, 58, and may have some designes for a larger sport fish.

    The 65 above, Hull#1, "miss Judie", is still owned by Jack Staples who has owned it since the first glass was laid up.

    PS- Hull#1 is the only one that has a kevlar reinforced hull- I think it was cost prohibitive to continue to build them that way.
    Last edited: Jan 6, 2004
  7. YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,353
    Location:
    South Florida
    Great info!! It really fills in the blanks on the history of the '65.

    I had a couple of Donzi's as a kid (16' sport outboard and an 18' 2+3 w/ Holman-Moody drive) back in the 70's. Loved my Donzi's. Graduated to 21' hulls designed by George Linder shortly thereafter (Shadow's) and started racing offshore in the early 80's. Later, I purchased and restored another Don Aronow original... a 28' Magnum. That was a hell of a project. Completely re-wired the entire instument panel, new gauges, new interior, new exterior paint, new Gimbals, new tabs and hydraulics, rebuilt TRS drives and a pair of small block Chevy engines with everything short of blowers. Ended up with an 80 mph boat that was reliable for about a month at a time!

    Thanks again for the info on the 65'. What additions or changes have you made to your Donzi... and what would you suggest to look out for if somebody was in the market for a 65'?

    Carl
  8. Canyon King

    Canyon King New Member

    Joined:
    Oct 10, 2005
    Messages:
    6
    Location:
    ny
    nice boat
  9. fish

    fish New Member

    Joined:
    Dec 16, 2003
    Messages:
    43
    Location:
    St. Pete Bch, FL
    Thank you Canyon King, and welcome to yacht forums. :)
  10. Bamboo

    Bamboo Senior Member

    Joined:
    Dec 19, 2008
    Messages:
    934
    Location:
    Palm Beach, FL
    Hey I know this is a older thread- but maybe they are still around.... Is that a conventional hard top?
  11. fish

    fish New Member

    Joined:
    Dec 16, 2003
    Messages:
    43
    Location:
    St. Pete Bch, FL
    Hi Bamboo, I am not sure what you mean by conventional hardtop. It is Hull #1 and that is the original top that Donzi Marine designed and installed when it was first built if that helps.

    Fish
  12. Bamboo

    Bamboo Senior Member

    Joined:
    Dec 19, 2008
    Messages:
    934
    Location:
    Palm Beach, FL
    It looks thin from the pics. Most conventional hardtops are cored fiberglass. Beautiful boat in every way!
  13. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Beautiful, what engines and speed does she cruise at with the kevlar reinforced hull?
  14. fish

    fish New Member

    Joined:
    Dec 16, 2003
    Messages:
    43
    Location:
    St. Pete Bch, FL
    thanks Bamboo, it is fiberglass and I can walk on it with no concerns at 245lbs. Being the first of the sportfish series, I know there were changes as time went on and Bob has done an amazing job of not only keeping up the quality, but of responding to owners requests to constantly improve them; I am sure there are several things from this one to the latest finished sportfish that are slightly different.

    Capt J, she still has the original 1692's. When first launched, her best was 41 mph which was phenomenal back in the late 80's, especially for being built like a tank. I cannot remember is that was before we put the tower on or not. We have always run her pretty easy; between 1650-180 rpms which is upper 20's depending on fuel load. For us, anything faster over a long period of time kinda beats on you with the wind and besides, getting there is half the adventure. :)
  15. Manny

    Manny Senior Member

    Joined:
    Mar 26, 2008
    Messages:
    158
    Location:
    Puerto Rico
    what a magnificent boat!

    I agree with fish. a boat's not about speed, it's about enjoyment. in some cases speed is just a bonus ;)

    the real enjoyment of a Donzi comes from the incredible ride in any sea conditions. I really do like them boats very much:D
  16. acasaretto

    acasaretto New Member

    Joined:
    Apr 29, 2009
    Messages:
    5
    Location:
    port everglades
    Older Donzi vs. Newer hatteras/viking

    Have been looking to buy a sport fish. Originally looking at boats in the 52-54 size range, specifically 2004 Viking 52 with 1300 mans and 2004 Hatteras 54 with C30 caterpillar.Then have looked at .buying an older Donzi- 65 or 72 foot. It appears that they could be purchased at same or better price than the newer hatteras / viking. I am concerned about buying an older boat and specificaly older engines 16V92, but feel that the older Donzi likely has a better ride and structurally more sound. I would get other people's opinion on the differences?
  17. Manny

    Manny Senior Member

    Joined:
    Mar 26, 2008
    Messages:
    158
    Location:
    Puerto Rico
    There's absolutely nothing wrong with a 65/72 Donzi EXCEPT for the engines. EVERY SINGLE ONE I've seen, which is around 15 ranging from 1987 to 1996, have the 16v92's. The boat, of course, is virtually built around that engine. Everything else about that boat is perfect; it'll survive a hurricane at sea(which was actually proven in real life), it's extremely spacious, it's actually quite fast despite the 16v92's(imagine one with the 16v2000!), the ride is one of the best I've ever experienced on ANY boat, and to top it all off it's stylish.

    Something I find rather convenient is that from years 1987 to today, Donzi's are built virtually the exact same way. Every single Donzi is the same, so buying one from 1987 is the same as buying one from 1994 as buying one from 2003(unless it has different engines, which I actually doubt). But of course, every model is "different", such as interior styling and very small exterior details. Hull design and superstructure is exactly the same. And you know what? I'm glad they're like that. Why change a boat that's already perfect? :)
  18. acasaretto

    acasaretto New Member

    Joined:
    Apr 29, 2009
    Messages:
    5
    Location:
    port everglades
    Donzi engines

    Thanks manny for your reply. what specicifically do you not like about the engines. Obviously older technology and they need to be rebuilt more often. Are they inefficient? like 100-140 gallons per hour at cruise. Are they smoky? My dad had a 53 hatteras with 12 71 naturals that required rebuiding once, but were very reliable engines. Despite the 16V92 engines would you still prefer a Donzi over a newer smaller Hatteras / Viking with newer engines (caterpillar / man).
  19. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    I would not be worried about an older vessel as long as it's maintained. They require about the same maintanence as a newer vessel, maybe a tad more. I think Donzi's are a well built boat, just not my cup of tea. The newer 54' Hatteras is a very good riding boat and a nice layout albeit a bit tight on storage space.

    As for the 16v92's, I remember a friend spent $250k rebuilding his. They don't go as many hours as some newer diesels and are not as clean running. I would guess fuel burn would be closer to 150gph. 12v92's usually burned around 120hr at cruise on the Sportfishes I've run, although one owner with a 63' Ocean with 12v92's said his burned 100gph.
  20. Manny

    Manny Senior Member

    Joined:
    Mar 26, 2008
    Messages:
    158
    Location:
    Puerto Rico
    I'm sorry, but that's totally exagerated. my 12v92's on my 54' Bertram burn about 70 gallons per hour at 1850. But the 16v92's, however, burn much more. it all depends on how used the engines are. the more hours and usage, the more it's going to burn. I actually have 2 friends both with 65' Donzi's, one from 1987 and another from 1990. The 1987 one had a major engine rebuild and made them new. It burns 100 at 1900 RPM's and makes 25 knots. BELIEVE ME, i've seen it before while onboard with my own eyes. The one from 1990, however, have VERY used up engines that require rebuild very soon. This one burns 130 GPH at 1850, and only goes at 18 knots. I've also been onboard this one and saw it with my own eyes.

    So basically, fuel usage depends on the condition of the engines themselves, because an older Donzi, with just better taken-care-of engines goes 7 knots faster than one that's newer while burning less.

    The only reason I wouldnt like 16v92's is because there are better engines out there. Believe me, if I EVER find a Donzi repowered with newer engines I would buy it right off the back. But it's not to say the 16 92's are bad, they're just older and have less HP than newer engines, they tend to be very dirty, and they're very heavy. But of course these engines have major advantages, such as being cheaper to maintain than most modern engines, they're reliable, and parts are easier to get for them. It all really depends on the condition of the engine and the vessel itself.