Click for Burger Click for Cross Click for Burger Click for Furuno Click for Mulder

Raritan Crown Head removal

Discussion in 'Post Yacht' started by deanpe, Feb 21, 2015.

You need to be registered and signed in to view this content.
  1. deanpe, Feb 21, 2015
    #1
    deanpe

    deanpe New Member

    Joined:
    Apr 19, 2011
    Messages:
    24
    Location:
    Hollywood, MD
    I removed the original Crown head and replace it with a marine elegance head. I wanted to have the fresh water flush to avoid the sea water "smell" and get something a little quieter. If anyone is interested in buying the crown let me know. 12v version works perfectly. It may need a new shaft seal as it leaked a little sea water when it was flushing. I can send pictures if anyone is interested.

    Patrick
  2. dennismc, Feb 21, 2015
    #2
    dennismc

    dennismc Senior Member

    Joined:
    Jan 29, 2009
    Messages:
    1,175
    Location:
    Vancouver BC
    If you are going to store it for a while, remover the motor or the salt will seize it up so bad it will need replacing.