Click for JetForums Click for Nordhavn Click for Burger Click for Oceanco Click for DeAngelo

News: Conrad Yachts C133 Nearing Completion

Discussion in 'Yacht News; Builds & Launches' started by Yacht News, Sep 21, 2017.

Thread Status:
Not open for further replies.
  1. C133 By Conrad Yachts Nearing Completion
    The flagship for Polish yacht builder Conrad Yachts is progressing well at this stage and is moving along towards the final stages of build. The C133 is a 40-meter motoryacht bearing exterior design by Reymond Langton with Naval Architecture by Diana Yacht Design. The interior is being done by the in-house team at Conrad Yachts. This is a groundbreaking yacht for Conrad Yachts and when completing it will represent the largest yacht built in Poland to-date.
  2. The interior is a pretty nice mesh of mid and dark tones contrasted by white to cream ceilings. Santos Rosewood as well as Makassar Ebony are the primary woods chosen to adorn the interior. The interior is spread across three decks with the layout pretty much in the traditional manner. The main saloon as depicted in the rendering below is characterized by large floor-to-ceiling windows on both sides and a space divided between the saloon area and the formal/main dining room. Recessed lighting in the ceiling as well as chandelier work adorn the white-lacquered surfaces.
  3. The interior is slated to accommodate up to ten guests in five cabins. The master suite is full beam and located on the forward main deck position where it has two sliding-doors. A large double bed is placed along the centerline with storage for miscellaneous items. Below decks, there are four double cabins for guests, two of them can be converted into large VIP-grade cabins should the need arise. Crew accommodation satisfies for six staff members.
  4. The 40-meter C133 won't be any speedster as she will focus more on economical cruising. Top speed is only going to be around 13-knots but at a continuous 10.5-knots the range increases to 4,000 nautical miles. The Conrad C133 is powered by a pair of CAT C18 ACERT marine diesels. Work on this yacht is continuing apace and she should be ready to hit the water in Poland in December of this year.

    For more information:

    Conrad Yachts
    Ul. Sienna 45
    80 - 605 GdaƄsk |
    Poland
    www.conradshipyard.com

    ***
Thread Status:
Not open for further replies.

Share This Page