Click for Northern Lights Click for Burger Click for Perko Click for YF Listing Service Click for Mag Bay

Cruiseair Rheostat and Auto/Manual On/Off assistance

Discussion in 'Technical Discussion' started by CSkipR, Apr 30, 2017.

You need to be registered and signed in to view this content.
  1. CSkipR, Apr 30, 2017
    #1
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Here are 3 pictures of thermostat and wiring from evaporator. Any ideas on how to bypass the variable speed control so its wired straight on high speed? The first picture is of the SA4A ZCB control. The second is the wiring on the back of it. Orange wire on rheostat runs down to terminal block in picture 3. Red wire runs from rheostat runs to upper control. Purple and black wire also run to terminal block.
  2. menkes, May 2, 2017
    #2
    menkes

    menkes Member

    Joined:
    Mar 13, 2007
    Messages:
    109
    Location:
    Aretsou, greece
    no pictures ????
  3. CSkipR, May 2, 2017
    #3
    CSkipR

    CSkipR Member

    Joined:
    Aug 16, 2008
    Messages:
    965
    Location:
    New Smyrna Beach, Fl
    Sorry about that for some reason they didn't post. Anyway jumped the rheostat so it no longer is active. Wired orange and pink wires together and increased fan speed.