Click for Furuno Click for Abeking Click for Nordhavn Click for Westport Click for Cross

Bertram 28 table - help

Discussion in 'Bertram Yacht' started by raffaele, Jan 3, 2018.

You need to be registered and signed in to view this content.
  1. raffaele, Jan 3, 2018
    #1
    raffaele

    raffaele New Member

    Joined:
    Jan 3, 2018
    Messages:
    1
    Location:
    Alghero
    Hello everybody,
    happy new year. Here is Raffaele From Sardinia (Italy).
    I am going to buy a Bertram 28 (1991) and i am very excited about that. I will change the motors and i'll put all my energy to make the boat great.
    I have only one "big" problem: the boat do not have the table inside the dinette, and it seems very difficult to find a new one. I'll use the boat basically for fishing and i think i'll not need the table to convert it in a bed. But - you know - i am sure that it could be happen, to spend two/three days out, and in those occasion you need a second bed.
    Do you have any suggestions?
    thanks a lot!!!

    All my best to all of you!
    Raffaele :)
  2. SeaEric, Jan 3, 2018
    #2
    SeaEric

    SeaEric YF Historian

    Joined:
    Jan 28, 2007
    Messages:
    1,362
    Location:
    out on the dock
    Hi raffaele, Welcome to YachtForums. I'm not sure why this is in the Post Yachts forum... That table is a very simple affair that would be easily duplicated. Measurements are dictated by the space where it drops to make the berth. Hardware to attach it to the bulkhead is typically a "tongue" and slot. Perhaps others will respond with a photo from below the table of the attachment points.
  3. YachtForums, Jan 3, 2018
    #3
    YachtForums

    YachtForums Administrator

    Joined:
    Dec 22, 2002
    Messages:
    20,373
    Location:
    South Florida
    Thread moved to the Bertram forum.