Looks great..
I had ordered mine direct from SSI I believe 5 years ago for my 1999. Not sure what year your looking for but they were an exact match.
Funny, I'm looking for the same hardware. The Knob came off.
On my 99 42, The water heater is located on the Bulkhead Behind the Port Motor. Drains towards the gunnel. Its a stainless steel contraption.
A single ECM is around $4250.00 inclusive of programming, for a simple (4 function) box the size of a cigarette pack. Yes I agree it is expensive.
By the way, I'm in no way complaining about the motors as they are fuel efficient run clean and have plenty of power to move the boat and are...
950 on each. I but 80 -100 Hrs a year on them.
1999- 42
I like my Volvo's. Pretty efficient. TAMD 73 P. The only thing I don't like is the early ECU modules have a tendency to go bad due to moisture and...
Good luck, resetting should solve the problem. Nagged me for two years on and off till it got real bad last winter with the freezing. Then it...
I just did just confirm you received.
I had the same problem on my 1999 42 ' post last year. I had to have the glass pulled (aft starboard side), the old sealant removed and the glass...
I had a boat prior to Sandy that was over 30 years old was insured by Boat US. However they were purchased by Gieco a few years ago so i am not...
Funny.. That can be taken so out of context :) We are glad you passed on it... though.
That's the one...I did a number of upgrades since I purchased it.. But I got a good deal for what was basically a little used freshwater boat.
Gelcoat Problem, Yes... The work was done in Maryland on the Chesapeake before I purchased the boat. Was not completed by post.
Gel Coat was stripped down to glass (the whole boat) the boat was epoxy primed then Sprayed. This was done just before I purchased the boat.. 6...
Mine Tops out at 31 Knots at the governed 2600 RPM. I did however shed some useless weight, like gelcoat, washer dryer ect. The Volvo's are...
I have a 99 with the TAMD 73P's (A little less HP and torque than the 74's). You definitely know when the turbos are spooling (around 1600 RPM)....
For what it's worth I have a 1999 42 Post and ran back from the Hudson Canyon 3 times this year into a 15-20 knot south west winds with 5-7 and...