Usually, port motor draws from forward tank. Starboard and gen draw from aft tank. your boat may or may not have a fuel transfer pump between...
I'm not aware of any hull changes in the 43. Thought I heard the 43II may have pushed the fuel tanks back. You are stepping on the forward fuel...
I have a reverso for fuel transfer. The pump is not different for oil or fuel transfer. The impeller rubber is different. when you search for...
Owned a 43 for 18 years that I just sold 2 weeks ago. Easiest sale I could ever ask for. Sorry... Will help however I can.
https://www.glendinningprods.com/wp-content/uploads/2018/01/tb06.pdf try this procedure. It fixed my throttles moving back.
I did this project myself on my 43. I posed this thread:...
I use Sew Clean once a year. Expensive and I'm looking for a generic equivalent. Cleans the scale from inside the hoses. Crazy what bubbles up...
I got a plastic tank 15 years ago from: https://www.oceanlinkinc.com/marine-tanks/holding-tanks-water-tanks I like how they will install the...
Seems like the biggest challenge may be the bottom of the holder hitting that angled inside wall? May not be able to be mounted facing aft fully?...
I've taken mine out to replace the roller. The pin is sitting in a notch on both sides. The plate just keeps it in place. The roller spins, not...
Agree. Just painted my 84 bulkhead with Awlgrip Oyster White. Very close match.
Mine was a rusty mess. I replaced it with aluminum plate. Can't remember where I got it, maybe Grainger? Drilled the same holes, replaced the...
I also shipped my old ones to DeAngelo and they made exact replacements. I doubt whoever made them originally has the template to make them...
I have an 84 43. I think our Salon AC setup is very similar. Mine has clogged before coming into the upper bunk. Mine has a small access panel...
Several years ago, I started cleaning the plumbing lines with Sew Clean. Let it sit overnight. I do this once a year. Worth every $$. What...
I usually cruise 2000 rpm. That gives 20.5 to 21.5 knots, depending on conditions. 2100 is 22 to 23 knots.
I'm runniing 24x25 with a heavy cup, 3 blades, on my 43. Really depends how much stuff you have on the boat. I get 2500 rpm with these. I...
Did you end up using this vendor? If so, how did the process go? I'm thinking about replacing my head and galley counter tops.
I believe a 2000 42 model hull had changes from earlier 80's models. More deadrise and better ride. But anything you read about pounding is...
I think I ran into that problem as well. If I remember, I just cut the front off of the inside block so it fit. As long as you have room for the...