I use regular queen size sheets...not the extra deep pocket fit.. then sew a large flat elastic band around the entire bottom sheet to give a...
It is a challenge backing in our 444 and seeing behind with or without the dinghy on. I mounted 2 cameras on the hard top and they display on the...
Carver 444 - 2001 Our 2001 Carver 444:D
I had the same vintage engines on a previous boat and and a similar problem. If the engine will not start check the coil wire. In my case the coil...
We have a Carver 444. This is our second twin - our first was a 31' Tiara and the difference in size made a difference. It took the admiral and I...
We have a Carver 444 with Cummins 370's and have been having some of the same issues as Tim - low power/not achieving full WOT rpm. I've posted...
you might try this site, it has surplus parts from a number of manufacturers including Carver. Boat Parts and Marine Supplies - Great Lakes Skipper
This is a change to the original thread, and maybe there is already one on the topic, but finding a surveyor and having a survey done may be a...
Pascal, the surveyor was wasted money. I took the recommendation of my broker which I should have done more research and checking. But to answer...
Thanks all for the replies. 3200 RPM is at the dock, with no load, under load the best we achieve if about 2950 or so. PacBlue, yes, we do...
Sam, thanks for the link. I have seen it before and that is what was making me wonder if I was missing something. There is a significant...
NYCAP, Capt J, and talexander, Thanks for the responses. I appreciate the feedback and information.
PacBlue thanks for the response. General Propeller is the shop we are working with, they are good folks. We have a light cup in the props. It is...
Thanks for the response. My mechanic suggested larger tabs. Do you know if your friend did new tabs or extensions. Did he have to add additional...
We seem to be in the same range. We are not looking for speed, but i found it strange that we would be so far off the the factory test data and...
Thanks for the reply. No-load RPMs were about 3200. The prop recommendation was from the mechanic and discussions with the prop shop based on sea...
We have a 2001 Carver 444 with 370 Cummins. The boat came from the factory with 24x30 4 blade props. We are not the original owners, have had her...
We drive from Denver to Tampa. We cover most of the route you show, picking it up east of St. Louis around Mt. Vernon. The roads are good, fuel...
Good Afternoon All, I am the "admiral" of a Carver 444 - which has a sliding glass door and screen leading from the master to the cockpit....
Jon, think of yacht brokers like real estate agents. They get their commission based on the sale and from the seller's proceeds. The buying and...