Click for Ocean Alexander Click for Cross Click for Glendinning Click for Walker Click for Nordhavn

Thruster installer needed

Discussion in 'General Yachting Discussion' started by MBevins, Feb 6, 2024.

You need to be registered and signed in to view this content.
Page 3 of 3
  1. MBevins, Feb 17, 2024
    #41
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,172
    Location:
    Windsor On. Canada
    Yes, the remote is a given and part of the spec. Motoryachtlover nailed it exactly.
  2. DOCKMASTER, Feb 17, 2024
    #42
    DOCKMASTER

    DOCKMASTER Senior Member

    Joined:
    Feb 26, 2012
    Messages:
    1,414
    Location:
    Ketchikan, Alaska
    I can see why a stern thruster would be much easier in your situation. Whereas splitting the gears works, you have finer control and can feather a thruster much better than just using the wheels. At least that’s been my experience.
  3. MBevins, Feb 17, 2024
    #43
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,172
    Location:
    Windsor On. Canada
    I agree, but in my case it's really about holding station in a lock or holding the boat to the dock while securing.
  4. sam356, Apr 9, 2024
    #44
    sam356

    sam356 Member

    Joined:
    Oct 31, 2011
    Messages:
    125
    Location:
    Great Oaks Fairlee Creek MD
  5. Cpt Sous-Leau, Apr 12, 2024
    #45
    Cpt Sous-Leau

    Cpt Sous-Leau New Member

    Joined:
    Mar 29, 2024
    Messages:
    25
    Location:
    USA, Earth
  6. MBevins, Apr 12, 2024
    #46
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,172
    Location:
    Windsor On. Canada
    I hear yah, my price from then was the same price range.
  7. Cpt Sous-Leau, Apr 12, 2024
    #47
    Cpt Sous-Leau

    Cpt Sous-Leau New Member

    Joined:
    Mar 29, 2024
    Messages:
    25
    Location:
    USA, Earth
    I just took a gander through the jetthruster site. Would need a dual pump and four ports for boats over 50' with a fair amount of cabin height(most power yachts). Getting pretty pricey just for the materials. Labor would be higher as well. Looks like a very nice setup with the jet pump, but the cost is a bit high.
  8. MBevins, Apr 12, 2024
    #48
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,172
    Location:
    Windsor On. Canada
    I to looked into, I couldn't get follow-up to my attempts to put a package together.
    I decided I didn't need to work that hard to spend money.
    So I found a guy that cares.
  9. Cpt Sous-Leau, Apr 12, 2024
    #49
    Cpt Sous-Leau

    Cpt Sous-Leau New Member

    Joined:
    Mar 29, 2024
    Messages:
    25
    Location:
    USA, Earth
    My dart board said about 20k Euros for the bits, and maybe 90-100 hours installed for the dual 90Kg. Lotta plumbing and lotta batts too.

    My dart board for the Side Thruster seems to be $5600 for the unit delivered to the shop, and about $7500 install, maybe a bit less if I have the bottom job done at the same time.
  10. MBevins, Apr 12, 2024
    #50
    MBevins

    MBevins Senior Member

    Joined:
    May 23, 2008
    Messages:
    1,172
    Location:
    Windsor On. Canada
    Your dart board is pretty close.
Page 3 of 3