Click for Abeking Click for Furuno Click for Perko Click for YF Listing Service Click for Mulder

Constellation Club

Discussion in 'Chris Craft Connies, Commanders & Catalinas' started by Jimbo1959, Aug 31, 2010.

  1. Striker36

    Striker36 New Member

    Joined:
    Sep 27, 2010
    Messages:
    3
    Location:
    sebastian/lake mary florida
    I have a 1968 chris craft connie that i am parting out.The chevy 454's and the a/c system is already spoken for as well as all the railings.all the glass and all the stainless and chrome fittings are for sale.Also 3 portholes,thru hulls and a onan genset.plus many more parts and lots of mahogany.The stringers and keel are intact as well as the struts and shafts.I am in sanford florida.The hard top has been removed and will be used on my Striker 37 sportfish.by the end of the week all the wood hull will be cut up. DSC01314.JPG
  2. coggin1

    coggin1 New Member

    Joined:
    May 10, 2014
    Messages:
    7
    Location:
    Ft. Lauderdale
    does anyone know the air draft of an 1987 chris craft constellation 460? im interested in doing the great loop and my boat will need to clear a 19' bridge in illinois
  3. SeaEric

    SeaEric YF Historian

    Joined:
    Jan 28, 2007
    Messages:
    1,360
    Location:
    out on the dock
    Does your boat have a radar arch? If not, you'll clear easily with the bimini down. If you have an arch with stuff mounted on top, you will likely have to get out the tape measure.

    Edit: Powerboat Guide says clearance is 17' 1". That is obviously without an arch (which was optional).
    Last edited: Dec 27, 2016
  4. MarinemanErik

    MarinemanErik New Member

    Joined:
    Apr 29, 2017
    Messages:
    1
    Location:
    Windsor ON
    Hello I am new to this forum just wondering who could point me in the direction of information on a 1965 Chris craft constellation 38 feet fibreglass hole looking for specs information thank you .