Click for Nordlund Click for Westport Click for Walker Click for Lurssen Click for Llebroc

Vantare yachts

Discussion in 'General Yachting Discussion' started by islandmech, Mar 22, 2012.

  1. islandmech

    islandmech New Member

    Joined:
    Jul 13, 2010
    Messages:
    9
    Location:
    Victoria B.C.
    Hi all, I am still looking for the next boat... Looked at a 1988 Vantare 44 sun deck with 3208TA the other day. Does anyone have any info regarding these yachts? who built them, hull construction etc? I did notice that the stringers are all glass ( no wood) and the fittings etc seemed good quality.
    Any help or info appreciated
    thanks, Gary
  2. ayachtguy

    ayachtguy Senior Member

    Joined:
    Nov 21, 2005
    Messages:
    64
    Location:
    Florida
    Vantares were a line of yachts imported from Taiwan in the late ‘80s, mostly to the West Coast through dealers in Southern California and Seattle. The owner of the company, Mike Guth, was a retired Navy officer and he had the boats built at Chung-Hwa. The first was a 58-footer designed by Jack Sarin, followed by a 64-footer. They all had “cab-forward” styling with the pilothouse very far forward to maximize the saloon. All sorts of power was available, with most getting Cats or Johnson & Towers, but you could also opt for vee-drives, jet drive or Arnesons, although I doubt if any were built. They all had upscale detailing, with imported Italian lighting and the like, but they were typical of Taiwan construction for the time and had balsa-coring throughout the hull and deck, so that would be something to consider. The company lasted a few years and Guth left boatbuilding and moved to Florida where he started building the luxurious Vantare motor coaches that were very successful for years.
  3. dennismc

    dennismc Senior Member

    Joined:
    Jan 29, 2009
    Messages:
    867
    Location:
    Vancouver BC and Florida
    I would double check the stringer construction, be double sure there is no wood under there. Check the foredeck around hatches ,winches and any penetrations etc for softness.
    Survey of course is mandatory.

Share This Page