Click for YF Listing Service Click for Perko Click for JetForums Click for Abeking Click for Abeking

Tankoa Hull S693 To Launch In June 2015

Discussion in 'Yacht News; Builds & Launches' started by Yacht News, Mar 31, 2015.

Thread Status:
Not open for further replies.
  1. Tankoa Hull S693 To Launch In June 2015
    Italy-based yacht builder Tankoa Yachts has earmarked June as the launch month for Hull S693. She is anticipated to be delivered the following month in July and then cruise around the Mediterranean until her official unveiling to the world planned for the 2015 edition of the Monaco Yacht Show (MYS). Work is continuing apace and many of the finishing materials are making headway. This yacht was signed back in March 2014 which would suggest the yacht was already under construction. The hull is made of high-tensile steel with the superstructure in aluminium alloy. The exterior design is by Francesco Paszkowski while the interior is by Francesco Paszkowski Design and Margherita Casprini.
  2. Some changes were made in the build since the new owner came on stream so it is still unclear what the owner chose for their final arrangement. The 1,400 gross tonne superyacht will be able to cruise 5,000 nautical miles at around 12.5-knots and run at a top speed of 16.5-knots at half load. This is possible via her 2 x CAT 3516B DITA marine diesels. Special effort is being made to clean her exhaust as much as possible. The engine's are fitted with carbon filters to help take out some of the harmful facets of the exhaust. For at-anchor performance hull S693 is fitted with four VT Naiad stabilizers. LOA is 69.3-meter with a 11.60-meter BOA and a 3.30-meter draft. Look out for this yacht to launch in the second half of June, 2015.

    For more information:

    Tankoa Yachts
    Via Cibrario s.n.c.
    16154 Genova Sestri Ponente
    (Italy)
    www.*********

    ***​
Thread Status:
Not open for further replies.