Click for Westport Click for Glendinning Click for Northern Lights Click for Mag Bay Click for Mulder

Going To The Dark Side

Discussion in 'Technical Discussion' started by Fishtigua, Feb 13, 2014.

You need to be registered and signed in to view this content.
  1. Bamboo

    Bamboo Senior Member

    Joined:
    Dec 19, 2008
    Messages:
    934
    Location:
    Palm Beach, FL
    Hah! My Mercedes diesel in my station wagons and many others are quite bullet proof. Easily some of the best diesels ever made. Please recall for quite a long time MTU was under/with the DB/Mercedes wing.
  2. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    Struggled?? Different feel, boat leaned different?? hardware problems??
  3. Fishtigua

    Fishtigua Senior Member

    Joined:
    Jul 20, 2007
    Messages:
    2,937
    Location:
    Guernsey/Antigua
    Not really a problem. It's like any new boat, you have to learn how it all works. His old boat was a very deep-V, the new Sealine was much flatter, so handled much differently in wind and tide.
  4. Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,649
    Location:
    Satsuma, FL
    Ahh, Understood.
  5. Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,432
    Location:
    Fort Lauderdale
    Well, with any of the systems. The Zues or IPS, they are only as good as the manufacturer tunes the computer and programs it. Everything has to be programmed to make them go sideways to turning at speed with the steering wheel. Cabo spent 400 hours on Cabo Uno tuning the Zues system and doing the programming......many other manufacturers spend the bare amount of time setting up the initial programming.
  6. Worthyvess

    Worthyvess Member

    Joined:
    Sep 29, 2012
    Messages:
    86
    Location:
    South shore long island and fort lauderdale
    Hi Fishtgua,
    We have a 2013 Regal 42SC with 400 IPS. All of a sudden the boat will only go to 3450 rpm. The Volvo mechanic has checked everything including props and can't find anything wrong. Is this normal? We have never touched anything with the props. Please help, will be so grateful!