Click for Nordhavn Click for Abeking Click for Glendinning Click for Perko Click for Mag Bay

Am I nuts to replace a Tides Dripless in the water?

Discussion in 'Technical Discussion' started by autowerks, Oct 13, 2014.

You need to be registered and signed in to view this content.
  1. autowerks, Oct 13, 2014
    #1
    autowerks

    autowerks Member

    Joined:
    Sep 27, 2011
    Messages:
    34
    Location:
    Chicago Illinois
    Long story short but my Tides Marine Strong Seal dripless fried on my starboard shaft the other day and needs to be replaced. The strong seal is no longer made so my plan is to replace it with a sure seal. The problem is I am in Chicago and all the local yards are busy hauling out for winter storage. Leaving me with the notion that I can do this in water. The boat is a 55 Ocean and I think I will have enough room to slide the shaft back about six inches, remove the strong seal and install the sure seal...quickly.
    The main reason I am considering this is that I may stay in the water this winter or move it to Michigan for storage. Thoughts?
  2. Capt Ralph, Oct 13, 2014
    #2
    Capt Ralph

    Capt Ralph Senior Member

    Joined:
    Sep 8, 2004
    Messages:
    12,736
    Location:
    Satsuma, FL
    We just finished (I hope) a long thread on dripless logs. Please do some searches and check into all our past threads for what has already discussed on the products.
    I'm in the south so not local enough to help on your venue or schedules.
  3. Beau, Oct 13, 2014
    #3
    Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    I am presently change my Tides strongs to sure seal. Read my post re coupler/shaft removal. The water coming into you boat would put you on the bottom!
  4. Fishtigua, Oct 13, 2014
    #4
    Fishtigua

    Fishtigua Senior Member

    Joined:
    Jul 20, 2007
    Messages:
    2,937
    Location:
    Guernsey/Antigua
    With Tides, we always fit a couple of spares on the shaft while it's off. Very easy to slide a new one on when the old one is worn.
  5. Beau, Oct 13, 2014
    #5
    Beau

    Beau Senior Member

    Joined:
    Jan 15, 2010
    Messages:
    2,261
    Location:
    Beaufort, NC
    the new model allows the seal to be replaced without slipping the shaft. I think I still would do that out of the water?
    Last edited: Oct 13, 2014
  6. P46-Curaçao, Oct 13, 2014
    #6
    P46-Curaçao

    P46-Curaçao Senior Member

    Joined:
    Mar 8, 2013
    Messages:
    734
    Location:
    Curaçao (CW), Hollywood (FL) and Amsterdam (NL)
    Me too, I would never take the risk to do this in the water!!
  7. Capt J, Oct 13, 2014
    #7
    Capt J

    Capt J Senior Member

    Joined:
    Jul 11, 2005
    Messages:
    14,434
    Location:
    Fort Lauderdale
    Can't you find a yard that will let you sit in the slings, maybe overnight and you can do it after they're done with their travel lift for the day or something like that? I certaintly wouldn't do this in the water.