Hi Ozzie I agree with Marmot, I had a similar problem onboard the vessel I work on. I was running two Generators on load and my alarm and...
Thanks folks I will think about it, where to go chill, mm maybe San Fran is good idea? Its still several months away till I make my decision...
Thanks for that info, yeh not specifically, im going to hang there but was wondering where would be a good place to base myself close to where...
Hi Forums Users What is the Big Boat scene like on the West Coast?? Im looking at heading to California are there big boats there doing yard...
I use a product called Rydlime. I use this to flush various heat exchangers/condensors. I guess that folks out there have their preferences.
Nice to hear Ken, I have joined a new boat in Florida during a yard period and we had Duggan and the boys working on the generators. Good guys and...
Nice to hear all your thoughts, well the problem seems to be intermittent. I am thinking that the problem occurs when the engine heats up and...
Hi and Merry X Mass to everyone out there. I have two CAT 3408 onboard, the one engine does not want to shutdown with the stop switch in the...
I will try that, we are busy now, so leaving it till I can order a spare part. But me thinks the gauge is the problem. Thanks for your thoughts
The wires from the working gauge and the wires from the non working gauge are linked to common wires going back to the switch. Check out the...
Thanks Marmot, that helps out nicely. Will look into it further when I get chance. I am still thinking that the gauge is the culprit.
Hi Ya folks, i have been browsing the forums on my topic but I am still not sure about my problem. I have a 100HP Yam, there are two digital...
Thanks Marmot, I am still troubleshooting another AC Earth Fault onboard, so this is on the backburner for now.
Hi Folks Thanks for comments Marmot, I will get to a few of your questions as I got side tracked with another problem by being woken up by an...
I am about to start troubleshooting a problem onboard. I have only been onboard for one month and have been informed that the sea water...
Okay thought I would give some feedback, underneath the Windlass is another valve block, I removed two valves and inspected the seals/o-rings and...
Yes guys thanks, my exacts thoughts....However it is only the one windlass that is running slower. I have not seen it yet, just been told by the...
Yeh that tool is used on there, I have not done anything yet.
Hi Guys, Just looking for some thoughts, I have Maxwell 6000 Vertical Windlasses onboard(Hydraulic) I have been told by deck crew that they are...
Okay I passed, These were just the things I needed clarification on. Anyways See you around Globe76