The way I did it .... You cannot avoid the need to form a flat surface for the piano hinges. I offer an outline of the method I used for mounting...
Pics of the boat I just noticed that Alloyed2Sea posted links to photos of my rebuild (on 05-02-2012; hull # RXP 37-2509). I can report that...
Fuel consumption My aluminum 37 ft. Roamer (37-2509) uses lots of fuel. From memory, this is my best recollection: 6 knots 3 nm per gallon 22...
Gibson - Did you search through the discussions here? A couple years ago another person had trouble removing their rudders and finally found...
how to remove the table support You need to remove the masonite wall to remove the ashtray holder/cup holder and table support. It is not that...
Last Weekend on the Severn Here's a picture of the (finally named) boat "Element 13". (The wife liked that name more than "Aluminum Falcon"....
Not a Homer Doppelganger That wasn't Homer. It was the (as-yet-unnamed) Roamer, a 1966 37', that now cruises the Severn River and the the...
Passenger capacity of the Roamer 37 I calculated 29 people for the roamer (37 feet long, 12 feet wide). Although, I would hate to put 29 people...
Drawer The drawer I am looking for is one of the small ones that was originally in the corner of the galley. Thanks! David
Roamer Nation, It was another wonderful weekend on the water with that fine vessel. I connected the synchronizer this weekend. That's one great...
Sure. I'll take the seats. How do you want to organize exchange? I can be reached at davidopie <at> gmail <dot> com Thanks!
Parts? Homer, I am missing a couple things. Do you have an extra drawer from the galley? Also, I am missing some of the rail latch hardware....
One more photo... The Roamer is testing the Severn River sand bars...
More pictures of Roamer 37 Pictures are from yesterday's dinner cruise on the Severn. Notice how the young crew stays alert, helping the...
This Roamer is finally back in the water and running! I bought it in 2003 and am finally putting final parts and pieces back on her. It's...
More of My Opinion: If two parts are mechanically joined (with bolts, screws, etc.), then I see no reason to glue the parts togeter with 5200....
Original toe rails On a 1966 37' aluminum Roamer I removed the original toe rails, sanded them, thoroughly covered the underside with epoxy and...
Roamer Parts YachtsmanBill, I am looking for a section of wood hand rail. I can send dimensions. Also, Have you located any of the aluminum...
Metal hulled Roamers are nice. However, be careful in committing to a project of this magnitude. I heard someone say that once you estimate...
NYC - Unlike a dorade, these are straight boxes from the deck scoop straight to the bilge. There is no tortuous path that can re-route the water...
