Click for Northern Lights Click for Nordhavn Click for Perko Click for YF Listing Service Click for Walker

New owner needs information.

Discussion in 'Technical Discussion' started by state, Jul 17, 2008.

You need to be registered and signed in to view this content.
  1. state, Jul 17, 2008
    #1
    state

    state New Member

    Joined:
    Jul 17, 2008
    Messages:
    1
    Location:
    Biloxi,MS
    I just bought a 1967 Chris Craft "Connie" and need some information and recomendation's. It has a HJ7C25 Paragon with twin 427, 300hp gas engines. I need to know the reduction spec. on the Paragon's and a prop size recomendation. Thanks in advance,STATE
    Last edited: Jul 17, 2008
  2. NYCAP123, Jul 18, 2008
    #2
    NYCAP123

    NYCAP123 Senior Member

    Joined:
    Mar 14, 2008
    Messages:
    11,205
    Location:
    Long Island, NY
    Chris Craft

    State,
    Go to the thread "List of known survivors". You'll find the people you need to talk to and may even find your questions already addressed. Also search the Forum under "Chris Craft".
  3. CaptPKilbride, Jul 18, 2008
    #3
    CaptPKilbride

    CaptPKilbride Senior Member

    Joined:
    Mar 16, 2004
    Messages:
    587
    Location:
    On the water
    The paragon should have a little brass plate, I think on the port side if I remember correctly, that will show the ratio