Click for Westport Click for Burger Click for Perko Click for YF Listing Service Click for Abeking

Alarm systems for 8V92TI

Discussion in 'Engines' started by Cloudman, Jan 29, 2013.

You need to be registered and signed in to view this content.
  1. Cloudman, Jan 29, 2013
    #1
    Cloudman

    Cloudman New Member

    Joined:
    Mar 31, 2007
    Messages:
    14
    Location:
    Hong Kong
    can any one give me details of the alarm/ monitoring system on DD8V92TI's
    need to find some replacement parts, boat built in 1998
  2. K1W1, Jan 29, 2013
    #2
    K1W1

    K1W1 Senior Member

    Joined:
    Sep 30, 2005
    Messages:
    7,394
    Location:
    My Office
    Hi,

    If you want temp or pressure transducers Danfoss make things for most applications.

    Other than that a bit more info might help you to get answers
  3. Ormond Bert54, Jan 29, 2013
    #3
    Ormond Bert54

    Ormond Bert54 Senior Member

    Joined:
    Mar 29, 2009
    Messages:
    470
    Location:
    Ormond Beach, FL
    Could be custom from the manufacturer of the boat. Bertram designed the engine alarm boards on my Bertram 54. The good news is that there are no computers involved (or at least there were none in 1984). I spent a day last week with a technician and replaced a relay to fix one of the faults. Suspect I will end up replacing some wiring/terminal connectors too before its all working properly again. My Marine electric technician initially thought it was work for an engine guy but once he got going and realized there were no computers involved, we were off to the races. One of my boards with the relays had to be rebuilt a couple of years ago and I was able to track down the original Bertram guy who designed the board.