Join Date: Jul 2011
Location: Subic Bay
Diesel Duck 462 for sale
530,000 USD, fully found, equipment as follows
Laying Subic Bay Philippines and can deliver or arrange shipment
The Diesel Duck 462 is a true, blue water passagemaker, with features found on boats costing twice as much. “Belle” has been custom built without compromise, under the supervision of a professional Marine Surveyor. This is not your average Duck, and features a robust electrical system with dual 110/220V- 50/60 Hz systems, proper ground tackle, a large sail rig for both stabilization and propulsion, paravane stabilization, fully optioned, and a comprehensive electronics package. Manufactured by Seahorse Marine and the attention to detail is evident throughout. Fitted with a beautiful teak interior and trimmed on a par with any high quality boat.
High quality, shot peened ship steel, sand blasted inside and out, three coats of International Paints epoxy primer interior and exterior, four coats of epoxy primer on the bottom, plus International Paint bottom paint and Dupont Imron colour top coat. Construction to China Ship Classification Society (CCS) practice. CCS certified weld X-ray of the entire hull and internal structural steel, CCS incline test.
Watertight crash bulkhead in the bow, with commercial ship quality, dogged down hatch.
Four commercial, dogged down, aluminium seadoors on the interior bulkheads (5 watertight compartments total).
Commercial ship quality, aluminium framed, opening hull ports, with integral steel storm covers
Deck hatches are aluminium commercial ship quality, opening, tinted option, stainless handles.
Pilothouse entry doors are aluminium commercial ship quality, dogged doors. Dutch door on Stbd side, vertically split type at the reear.
Pilothouse windows are 10mm toughened glass plate with integral storm cover bosses.
Pilothouse tinted side window option, while the front 5 windows are not tinted.
Fully faired hull and topsides. The hull is so straight that it looks like a fiberglass boat.
PSS dripless shaft seal on both the prop shaft and rudder shaft.
Line cutting “Spurs” on prop shaft
Sea chest for main sea water inlets.
Sound insulation surrounding engine room.
Quiet, large capacity engine room intake and exhaust blowers with noise isolated vents.
Intake blower is reversible for engine room cooling at anchor.
Fuel fill distribution manifold with stainless steel ball valves at each end of fuel lines.
Stainless balanced rudder.
Integral swim and boarding platform
The DC electrical system is designed for redundant backup and international operation. It features 2 x 3000 W/70A Victron inverter/chargers, 2 x 140A Leece Neville large frame alternators, Balmer regulator, 100A Victron charger for the house bank, 40A Victron charger for the genset start battery, Victron controller for charging the house and main engine start banks, and a 1000 AHr - 2V GEL cell house bank.
The boat is capable of running the aft cabin air-con/heat overnight on the batteries. Since the total inverter capacity is 6 Kva and the alternators are 280A, the boat can operate while underway using the alternators and inverters only – the gen set is not required. At anchor, the 240A of charging capacity insures rapid, but safe, charging of the house bank with minimal genset run time, or rapid charging on shore power.
A 9000W Toroidal isolation transformer accepts 120/240V - 50/60 Hz dock power.
Internally the boat is wired for dual 110/220V system for worldwide use
24V ships systems
Anti-sulphation pulse generators on house and engine start banks
All systems are isolated by vapor proof master switches.
Shore power master breaker is GFI (RCI) type for safety.
LED indirect lighting and red safety lighting at the steps. Pilothouse overhead lights have red night vision lighting as well as standard white bulbs.
Visual and audio warnings for all system malfunctions including high water, engine water flow, engine room overheat, any pump running, engine room lights left on, etc.
All wiring is multi-strand tinned copper boat cable.
Wire runs in conduit, and all runs with the exception of the bilge pumps, are located as far above the waterline as possible
All wire runs including those along the shear are easily accessible.
Lightning protection system.
Multiple zinc’s on hull, standard size, bolted, not welded.
Spreader lights and, deck lights installed.
Remote control spot light installed.
Windscreen wipers with fresh water wash.
Keel cooled, non-electronic, 150 HP John Deere 4045 TFM engine. Fitted with a Gulf Coast oil by-pass system, and 2 x 140A @24V alternators
Northern Lights 9Kw at 60 Hz (7 Kw at 50 Hz) genset in a sound shield enclosure. Fitted with a Gulf Coast oil by-pass system.
Comprehensive fuel polishing system
24V bow thruster
Trolling valve on the gear to allow slow speed running
Fresh water system uses neoprene coated metallic tubing, not plastic.
Stainless ball type seacocks on all thruhulls below the waterline.
Double, all stainless clamps, on all hoses below the waterline.
3 Rule electric bilge pumps plus a manual bilge pump
Village Marine 600 USG/day watermaker
Electric domestic hot water tank, with engine water heat exchanger
2 heads, both with shower – one in the aft cabin with a separate shower, and a wet head off the salon next to the fwd cabin
Heads have power ventilation on timer switch.
Towel rails are to handrail strength.
Mirrors are fitted.
Toilet walls are fiberglass laid up with epoxy
Toilet flooring is tile.
Fresh water Techma electric toilets plumbed to holding tank, with the capability of direct discharge.
Upgraded with lifetime guaranteed, “no smell” head hoses
Stainless steel pulpits, hand rails and boarding gate
Stainless steel heavy bollards, chocks, and cleats for lines, not painted steel.
Stainless belaying pins for lines
Lifting lugs on hull for crane hoisting
Drogue anchor and/or towing mounting points
Bow and stern wash outlets
Non-skid deck coating
Watertight storage locker on aft platform with a commercial ship quality dogged down
Lifeline on pilothouse roof
Stainless guards on pilothouse roof for electronics and to prevent sail fouling or damage
Stainless davits for dinghy with Harken double blocks and fed to the Harken winches
Paravane stabilization system
Stainless davits for paravane fish retrieval
Protected cockpit at rear of pilothouse with a Sunbrella bimini
Sunbrella covers for all windows, hatches, winches, BBQ, and dinghy
10 ft. Livingston dinghy with a Yamaha 15 Hp 2 stroke outboard
Deck fresh water wash pump with hose bibs both aft and fwd for anchor wash. The boat also has the optional high pressure salt water wash system.
Stainless swim step ladder
Optional 48 ft. large sail rig
Harken self furlers on both the jib and mainsail
Harken self tailing, manual winches
Upgraded Harken blocks
Upgraded Harken mainsail traveler
Upgraded Harken furling blocks
Lewmar line jammers for control lines
Indoor walls are teak plywood with solid teak trim.
Locker doors, head doors, drawers etc are solid teak
Soles are solid teak and holly – not plywood or parquet.
2 cabin, 2 head layout with a walk around standard queen size bed in the aft cabin, 2 bunks in the fwd cabin
Lots of cabin lockers and drawers for storage
Reading lights and/or night lights aboard wherever applicable.
Teak safety grab rails fitted in proper locations throughout.
Custom ladies makeup table in both cabins
Hidden gun locker
Granite counters in the galley, heads, and salon. Corian counters in the cabins
High end Ultraleather (Aclantara) upholstery throughout
Built for worldwide crusing in both hot and cold climates with sprayed expanding foam insulation throughout the entire boat. Air-con units are reverse cycle (provides heat too) with a 13,000 BTU unit in the salon, 8000 BTU in the aft cabin, and a 13,000 BTU unit in the pilothouse.
Heat is provided not only by the 3 reverse cycle air-con units but via the main engine hot water system with 3 fan forced radiators in the salon, aft cabin and pilothouse. There is a
Dickenson diesel heater in the salon.
LPG stove with three LPG burners and one electric burner, oven with rotisserie,
solenoid shutoff with twin sensor leak monitor. Complete with 2 x 20lb LPG cylinders in exterior lockers that serve double duty for the stainless BBQ.
Top of the line Westinghouse domestic washer in a custom teak enclosure
Stainless domestic fridge, in a vented enclosure with a thermostatically controlled exhaust fan
Chest type deep freezer
Desk in salon
Large screen LCD TV plus a DVD player
NAVIGATION AND ELECTRONICS:
Raymarine E-12 integrated electronic colour plotter system
Raymarine 4 Kw radar
Raymarine GPS and flux gate heading sensor
Comnav GPS compass
Raymarine LAN network interface to a PC for redundant or dual display computer based navigation
Icom 602 VHF radio with hailer and mast head VHF antenna, Icom VHF remote hand held control
Icom hand held VHF radio
Icom 802 SSB radio with AT140 auto tuner and Shakespeare 23' SSB antenna,
Pactor III modem for SSB enabling radio based email and weather reporting
ComNav autopilot with remote control. A second ComNav pilot with remote control is attached to a second steering cylinder for redundant power steering.
Airmar ultrasonic weather station
Raymarine RNS navigation software for redundant PC navigation
Suunto D-165 magnetic compass
Raymarine tri-data wind display
Raymarine 600W colour sounder/fish finder
Navionics Gold charts – All of Asia, less Japan
Paper charts for all of Asia, less Japan
Raymarine Lifetag man overboard system – 4 tags
2 ea - 24-12VDC converter for electronics
Furuno Navtex weather receiver
Rudder angle indicator
Comar CSB-200 AIS – Class B transmit/receive type
Echo Pilot Platinum forward looking colour sonar
Flowscan fuel monitoring system
LCD display with cameras in the engine room and facing aft
Muir Jaguar 24 volt anchor windlass with both chain and rope gypsies. Optional helm remote control and chain counter, with traditional controls at the windlass.
92m (300') 18mm nylon anchor rode with short section of chain for the spare anchor.
Main anchor rode is 122m (400’) of Acco 3/8 certified high test chain and shackles.
Main anchor is a 55 Kg (121 Lb) Rocna, mounted on a dual chute, self launching bow roller
2 spare anchors - a 32 Kg (70 Lb) stainless deck mounted plow anchor and a 18 Kg (40 Lb) galvanized Danforth anchor.
Stern anchor is a galvanized Danforth
Dinghy anchor is a galvanized Danforth
Florintino Parachute style sea anchor
SOLAS 6 man raft in a canister
EPIRB with GPS
Raymarine man overboard system with 4 man tags
VHF and SSB both have DSC
Six standard life vests
Four offshore inflatable life vests
Hand powered watermaker for the raft
Comprehensive medical kit
Two Mustang cold water immersion survival suits
Two throw rings
MOB hoist system