Click for Lurssen
Click for McKinna
Click for Nordhavn
Click for Cheoy Lee
Click for Horizon
Click for Burger
Go Back   YachtForums.Com > YACHT & BOAT FORUMS > Sailing Yachts > General Sailing Discussion > Legacy on the Hard

Login to YachtForums
Username
Password

Reply

Legacy on the Hard

 
 
LinkBack Thread Tools Rate Thread Display Modes
Old 04-26-2007, 05:40 PM   #106 (permalink)
AMG
YF Moderator
 
AMG's Avatar
 
Join Date: Jul 2004
Location: Sweden
Posts: 4,715
Quote:
Originally Posted by Norseman
Are these big yachts designed and built to stay in marinas all the time and not ride out storms at anchor? Ever?

Anchors and rode sized for near-gales only..?
I think a yacht like this has about 200 meters of anchor chain which should help the anchors to sustain even a hurricane. But if it is shallow and you just have half or less of the chain out, it could be harder for the anchors when the yacht is bouncing on the surface and lifting all of the chain.

And if one goes, the other will soon go as well...
AMG is online now   Reply With Quote
Old 04-26-2007, 06:26 PM   #107 (permalink)
Senior Member
 
Norseman's Avatar
 
Join Date: Feb 2005
Location: Ft. Lauderdale
Posts: 733
Quote:
I think a yacht like this has about 200 meters of anchor chain which should help the anchors to sustain even a hurricane. But if it is shallow and you just have half or less of the chain out, it could be harder for the anchors when the yacht is bouncing on the surface and lifting all of the chain.

And if one goes, the other will soon go as well...
Okay thanks.

So is that 200 meters chain divided into 2 rodes, with 2 anchors?

That would be 100 meters each.

Plenty for the shallow waters in Florida and the Bahamas for sure.

What about the anchors?
Design, construction and holding power?

(I don't have any experience with the class of yacht we are talking about: The biggest yacht I ever skippered was a Johnson 70 and the anchors that came with that boat was more fit for a Boston Whaler: Told the owner to get a least a 110 lbs Delta. He agreed if I could get one that was shiny...As in Stainless Steel. The biggest they made in SS then was 88 lbs..40 KGs..Not quite big enough in my book)

Just curious about the anchor logic on big yachts as I seem to remember the Mirabella V dragged anhor and hit the rocks in a gale...In a hurricane, all bets are off, but a gale..?
Norseman is offline   Reply With Quote
Old 04-26-2007, 06:49 PM   #108 (permalink)
AMG
YF Moderator
 
AMG's Avatar
 
Join Date: Jul 2004
Location: Sweden
Posts: 4,715
Quote:
Originally Posted by Norseman
Okay thanks.

So is that 200 meters chain divided into 2 rodes, with 2 anchors?

That would be 100 meters each.
I have no idea what anchors or length of chain Legacy had, but many 50 meter yachts has 2 x 200 meter chain. 100 meter is what you find on 25 meter yachts.
AMG is online now   Reply With Quote
Old 04-26-2007, 07:02 PM   #109 (permalink)
Senior Member
 
Norseman's Avatar
 
Join Date: Feb 2005
Location: Ft. Lauderdale
Posts: 733
Quote:
I have no idea what anchors or length of chain Legacy had, but many 50 meter yachts has 2 x 200 meter chain. 100 meter is what you find on 25 meter yachts.
Okay thanks.

So the industry standards is chain lenght based on yacht lenght?

The kind of boats I deal with these days, sailboats 35 to 40 feet usually sport 33 meter chain spliced to 66 meter 3/4 inch 3 strand nylon.

The offshore/around the world guys sometimes have 100 meters of chain...3/8 inch or 5/16 High Test (G4)

Every boat is different however depending on the owner and how good he wants to sleep at night.

Just curious if the big yachts have a set standard..Or is it up to the designer, or the owner or the yard or whatever.?
Again, this is a subject that interest me as I almost lost my boat 21 years ago due to inadequate anchoring gear and my inexperience:

Dragging towards the rocks in Lindbergh Bay in St. Thomas in a gale and could not get the engine started due to bad batteries...Had one and only one shot disconnecting the battery cables and cleaning corrosion of the terminals while the boat was dragging up on the rocks..
The engine started last minutte and we motored out of there on a wing and a prayer..
Never again....
Norseman is offline   Reply With Quote
Old 05-19-2007, 06:59 PM   #110 (permalink)
Senior Member
 
Norseman's Avatar
 
Join Date: Feb 2005
Location: Ft. Lauderdale
Posts: 733
Soo, any updates of refloating/salvaging Legacy...?
Norseman is offline   Reply With Quote
Old 05-20-2007, 06:42 PM   #111 (permalink)
Senior Member
 
Join Date: Jan 2006
Location: Palm Beach to Ft Lauderdale
Posts: 1,863
Last heard was that the coffer dam idea did not work out. There are some thoughts (not sure how serious, but thoughts nonetheless) about pulling her out. Perhaps they should cut the keel off first, pull the yacht out, then go back with some gear and retrieve the keel (or leave it there as a monument).
And hurriance season is right on us. The saga continues...
CaptTom is offline   Reply With Quote
Old 05-20-2007, 11:53 PM   #112 (permalink)
Registered User
 
Join Date: Apr 2007
Location: Scotland
Posts: 32
What about having a RIB collar manufactured to fit the hull below the waterline. Once it had been fitted it could be inflated and just float her out.

Either that or a string of inflatable fenders bound tightly together along her length below the waterline, same effect as above but cheaper and quicker to implement?

Either solution wouldn't need to be that big.

40 of these, 20 down each side with suitable line through the apertures would probably do the job. These are NATO stores righting bags for RIBS.

Any thoughts?
Attached Images
JoeQ is offline   Reply With Quote
Old 05-21-2007, 11:51 PM   #113 (permalink)
Registered User
 
Join Date: Jan 2007
Location: Southern California
Posts: 98
Based on my experience with floating small vessels grounded and sunk, the tough part is getting the float bags to stay low enough. It sounds stupid but they really do want to come to the top and there just aren't many options and none at the correct angles fro keeping them low.
Since this was a longer term salvage than most though, surely a custom solution such as you suggest could be worked out, maybe in conjunction with cutting off the bulk of the keel?
yotphix is offline   Reply With Quote
Old 06-05-2007, 11:28 AM   #114 (permalink)
Registered User
 
Join Date: Feb 2007
Location: Westhampton Beach, NY
Posts: 4
I like the idea of stringing fenders or other inflatables along the port/starboard sides of the hull. Why not string them up BEFORE inflating them so that they would not float to the top before their installation is completed?
Leschins is offline   Reply With Quote
Old 06-05-2007, 01:39 PM   #115 (permalink)
Senior Member
 
Join Date: Mar 2007
Location: South Florida & Mediterranean
Posts: 237
Has anyone found Legacy on Google Maps or something? Seeing as she's been so long out there I'd assume shes already been pictured by some sats?

I have no idea where she is since I dont know the area, but maybe someone can post a pic or instructions or coordinates (I think GMaps allows coordinates, right?)
RVN-BR is online now   Reply With Quote
Old 06-05-2007, 01:49 PM   #116 (permalink)
YF Moderator
 
Kevin's Avatar
 
Join Date: Nov 2004
Location: Montreal, Qc, Canada
Posts: 2,417
Back on Page 3 of this thread I'd posted THIS PIC which was taken from Google and the coords are on it. Looking on Google Maps doesn't help much though (LINK), it's an older low-res pic. Google Earth (the application) is what you need... that's where the pic came from.
Kevin is online now   Reply With Quote
Old 06-05-2007, 01:57 PM   #117 (permalink)
Senior Member
 
Join Date: Mar 2007
Location: South Florida & Mediterranean
Posts: 237
Wow... i missed your link... this picture is probably the most impressive imho!!!
RVN-BR is online now   Reply With Quote
Old 06-05-2007, 09:21 PM   #118 (permalink)
YF Associate Writer
 
Join Date: Apr 2004
Location: Coral Gables/Ft. Laud., FL
Posts: 1,301
Quote:
Originally Posted by Loren Schweizer
"Legacy" is stranded between Bluefish and Calda channels.
The NOAA chart shows between 1 and 3 feet, Mean Low Water, oh yeah, and 'Mud, Grassy'.
If you are familiar with this real estate, you might argue that the surveyors should have more accurately termed the bottom 'Oatmeal, Watery'.

I know how "Legacy" found her way to her current resting spot. The question is how this 'FAS-DAM' (check out their site and look at the metal framework that is central to their design) will be set up and not yet sink into the muck.

Fearless prediction: this'll never work.

The dictionary defines 'legacy' as ...that which remains from a previous generation or time.

Hope she don't aim to live up to her name!
Ahem....
Loren Schweizer is offline   Reply With Quote
Old 06-12-2007, 12:09 AM   #119 (permalink)
Registered User
 
Join Date: Jun 2007
Location: Miami
Posts: 2
A new salvage effort begins this week??

Should be interesting to see how it goes, no quick easy fix this time like Fas-Dam.
VTXrider is offline   Reply With Quote
Old 07-17-2007, 03:12 PM   #120 (permalink)
Registered User
 
Join Date: Jul 2007
Location: Gulfport Florida
Posts: 5
Any news about the Legacy refloat?

Anyone know how the refloat ops are proceeding?
asailsman is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are EST. The time now is 08:51 AM.

Click for Walker
Click for DeAngelo
Click for Ferretti
Click for Moonen
Click for Trinity
Click for McConaghy


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.

Content Relevant URLs by vBSEO 3.3.2