Click for Furuno Click for Northern Lights Click for JetForums Click for Westport Click for Abeking

'74 Chris Craft Roamer Fuel Valves and Main Engine Strainers

Discussion in 'Chris Craft Connies, Commanders & Catalinas' started by grandpagary, Feb 12, 2010.

  1. grandpagary

    grandpagary New Member

    Joined:
    Feb 12, 2010
    Messages:
    15
    Location:
    Guntersville, Alabama
    I own a 60' 1974 Chris Craft Roamer Motoryacht. I have been unable to locate the fuel tank equalization valves. I need to balance the fuel between the two tanks. I've located several valves but some of the tags are missing so I cannot determine their function. As a matter of fact if anyone has a schematic of the fuel system I certainly could use a copy. The Mariner's Museum does not have this schematic, I already checked.
    I would also like to find out what kind of strainers were used for the main engine water intakes. I can find no markings on them. Most of the other strainers are Groco and are maked with the model number and size but not these.
    Any assistance would be greatly appreciated. Thank you, Gary
  2. gerconst

    gerconst Member

    Joined:
    Aug 19, 2008
    Messages:
    52
    Location:
    Elk Rapids Harbor, Michigan and Gibraltar, Michiga
    Try the Roamer club here on YachtForums
  3. grandpagary

    grandpagary New Member

    Joined:
    Feb 12, 2010
    Messages:
    15
    Location:
    Guntersville, Alabama
    Thank you. I'll give it a try.