Click for Ferretti
Click for Alexseal
Click for Oceanco
Click for Christensen
Click for Delta
Click for Bering
Go Back   YachtForums.Com > YACHT & BOAT FORUMS > Motor Yachts > Chris Craft Roamer Yacht > 35 foot roamer

Login to YachtForums


35 foot roamer

LinkBack Thread Tools Rate Thread Display Modes
Old 07-02-2012, 12:15 PM   #1 (permalink)
Registered User
Join Date: Jul 2012
Location: vancouver bc
Posts: 2
35 foot roamer

recently acquired a 1960 35 foot roamer . Just wondering what those little holes are in the hull just below the side windows,just aft the rectangle port holes. Are these for running lights, vents or bilge outlets? Any thoughts??
new to roamer is offline   Reply With Quote
Old 07-02-2012, 06:56 PM   #2 (permalink)
Senior Member
Laurence's Avatar
Join Date: Aug 2006
Location: Chattanooga TN
Posts: 248

Drain holes for the window frames. Keep clean and open!
Laurence is online now   Reply With Quote
Old 07-02-2012, 09:15 PM   #3 (permalink)
Registered User
Join Date: Jul 2012
Location: vancouver bc
Posts: 2
my wood window frames have drain holes that run from the inside of the track to the outside. The holes we are asking about are down in the side of the steel hull below the deck level, our roamer was gutted on the inside and there is one hole just below first stringer down aft of the v berth to saloon bulkhead on both the port and stb. sides. I can see a fitting in some of the pictures I have seen of the same boat but I can not identify what it is. these seem a little large and quite far down for another window drain.
I hope I have explained our query a little better as it will take us a while to put up a picture. Also is there anywhere we can access any technical information for this boat we have the owners manual but it does not help much.
Thank you for any advice
new to roamer is offline   Reply With Quote
Old 07-03-2012, 08:22 AM   #4 (permalink)
Registered User
Hal Swinehart's Avatar
Join Date: Nov 2004
Location: LaSalle, Michigan--Toledo Beach Marina
Posts: 16
I suspect that these are the holes for the running lights. Mine are roughly 18" behind the V-berth ports.

For more information on your boat:

They have extensive Chris Craft records, including the original Equipment Record for your specific boat. All you need is your hull number.
Hal Swinehart is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are EST. The time now is 07:13 AM.

Click for Nordlund
Click for Elling
Click for Ocean Alexander
Click for Ferretti
Click for Burger
Click for Cape Scott

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.

Content Relevant URLs by vBSEO 3.3.2